Ametek 76004143, Оригинальная инструкция по эксплуатации

Страница: 13 / 55

Safety
SPECTROLAB — 23.07.2020 — 13

Compliance with the relevant safety regulations for the use of auxiliary aids
and operating equipment is mandatory.

Carry out only those maintenance tasks that is described in the chapter
"Maintenance" of the operating instructions. The operating personnel are not
permitted to perform any other maintenance work. Any further services (e.g.
technical maintenance) or repairs must only be performed by service
personnel that are authorized by the manufacturer.

Check the protective measures after every technical maintenance or repair
activity. The checking procedure is carried out in accordance with DGUV V3
(German Social Accident Insurance) or an equivalent national regulation.

Compliance with the maintenance schedule specified by the manufacturer
and the recording of all maintenance activities is mandatory. This helps
maintain the operational safety of the instrument.

Only genuine spare parts must be used when repairing the instrument. If
using components other than OME parts, the CE Declaration of Conformity
shall be null and void.
2.3 Intended use
This instrument analyzes and identifies metals. Only such metals may be analyzed
for which the instrument has been calibrated by the manufacturer or by qualified
technical personnel.
Only the original accessories supplied with the instrument must be used and shall
only be used indoors (laboratory environment).
The instrument is intended for use in the industrial sector. Electromagnetic
interference may occur during the operation of the instrument. In this case, the
manufacturer must be contacted.