Ametek 3050-DO, Руководство пользователя

Страница: 37 / 46

Calibration Menu
The Calibration Menu allows the user to configure the analyzer for cali-
bration, perform the calibration, view the last calibration and calibration
history.
1. From the Main Menu screen, press the ENTER / MENU key to access
the Menus.
2. Use the left and/or right navigation arrows to locate the Calibration
menu and press the ENTER / MENU key.
Calibration screens subject to change based on the model of 3050 ana-
lyzer being calibrated.
Start Calibration
A.
B.
Figure 25a and 25b. Start Calibration screens.
On Figure 25B. ZERO calibration will appear for 3050 analyzers
other than OLV model. The calibration command will be sent after
START is activated. To view Cal Status after 3050 mode changes to
calibrating requires navigating to the Cal Status screen where the
status will be displayed.
AMEVision User Manual
|
37