31
1400700-101 Rev. A
PC Program Config
(continued)
Test Scale / Load Scale
At
Test
you can test your new generated scale. Type in an
Input Value
for a known refractive index. At the
field below, the actual temperature is required. If you click
Calculate,
the
Scale Result
will be computed.
Figure IS-21, Test New Scale
If you click
LOAD
, you can load a pre-generated scale on your device. By pressing the
SAVE
button you
are able to store a generated scale on your PC.
Brix Scale
The
Brix Scale
is pre-defined on your device. Because of this fact you can’t edit the coefficients. The other
values can be changed by the user for individual configuration.
Min. Input Value
signifies the smallest
input parameter, the same goes for
Max. Input Value
. Within the limits of
Min. Temperature
and
Max.
Temperature
correct scale values could be computed.
Format Length
and
Decimal Places
allow you
to set the resolution of the scale. The coefficients result from the measurements with known samples and
were provided to you by Reichert.
Figure IS-22, Brix Scale
Instructions for Use
(continued)
Содержание 1400700
Страница 1: ...REICHERT AR5 User s Guide...
