manualshive.com logo in svg

AMETEK/PRESTOLITE POWER ULTRA CHARGE, Руководство пользователя, Страница: 26 / 70

Поделиться
Скачать
AMETEK/PRESTOLITE POWER ULTRA CHARGE Скачать руководство пользователя страница 26

March 31, 2005                                                                                                                                             7-9 

27. BLOCK START          The beginning time of the 
                                         time of day blockout 
                                         function (AM/PM).  See 
                                         START MODE                                 
 
28. BLOCK END              The ending time of the time 
                                         of day blockout function. 
                                         (AM/PM). See START 
                                         MODE. 
 
29. START OVERIDE     The start override function  
                                         that allows the operator to 
                                         override any of charger start 
                                         modes (i.e. delayed start, 
                                         time of day start, or time of 
                                         day blockout) by pressing 
                                         the ENTER key. 
 
30. START MODE           Shows the selected start  
                                         mode for the start of the 
                                         charge cycle. 

 

 

 

 

  AUTO    =   Automatic mode 

 

                                         T.O.D.S. =   Time of day 
                                                             start  mode 

 

                                         DELAYED= Delay start mode 

 

                                         T.O.D.B.  =  Time of day 
                                                             blockout 

   

                                         TIMER    =  Timer Mode 

 

31. FORMING CYCLES   The number of forming  
                                          cycles for a new battery by 
                                          disabling the low current 
                                          shutdown, and setting VT 
                                          Termination mode for the 
                                          programmed number of  
                                          cycles (00 to 30). 
 

 
 
  
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

32. SPECIAL OPTION        Special option modes see 
                                            below. 

 

                      OFF 

 

                     “P.T.S.“      =   Push to start mode. 

 

                                            The charger will not start 
                                            until the “ENTER” key is 
                                            pressed. 

 

                       F.L.O.      =   Fault lockout mode. 

 

                                            The charger will not restart 
                                            until any faults are reset by 
                                            pressing the “ENTER” key 
                                            with no battery connected. 

 

33. CYC. AMP HOURS      The ampere-hour setting of 
                                            the charger during the  
                                            charge cycle.  This value  
                                            cannot exceed the 
                                            maximum charger output 
                                            rating. 

 

34. CYCLE CELLS             The cell size setting of the 
                                            charger during the charge  
                                            cycle. This value cannot  
                                            exceed the maximum  
                                            charger output rating. 
 
35. FIXED CELL SIZE        The cell size the charger  
                                            will operate at if the”multi- 
                                 

     cell mode” is not selected 

                                            and the charger does not 
                                            detect a Prestolite BID 
                                            module.  See “MULTI- 
                                            CELL  MODE”. 

 

36. FIXED AMP HRS          The ampere-hour size the 
                                             charger will operate at if  
                                             the charger does not 
                                             detect a Prestolite BID 
                                             module. 

                                     

37. FIX.BAT.TEMP.             The battery temperature 
                                             used for charger output 
                                             voltage compensation, if 
                                             the charger does not  
                                             detect a Prestolite BID 
                                             Module (032 to 132°F). 
                                              

 

           CAUTION: Do Not Exceed the Battery 
           Manufacturer’s Maximum allowed Battery 
           temperature. 

 
 
 
 
 

WARNING: Enabling the Finish Cell 
Forming feature will cause the   
charger to continue to run for a   
period of time if the battery has  
been disconnected before Charge   
Complete or pressing the Manual  
Stop key. This condition will continue 
until the programmed number of     
cycles have been completed. The 
battery should never be disconnected 
while a charge is in progress. 

193111-068 

UC2000 CONTROL FEATURES 

Содержание ULTRA CHARGE







































































Отзывы:

Нет отзывов