manualshive.com logo in svg

AMETEK/PRESTOLITE POWER ULTRA CHARGE, Руководство пользователя, Страница: 25 / 70

Поделиться
Скачать
AMETEK/PRESTOLITE POWER ULTRA CHARGE Скачать руководство пользователя страница 25

193111-068 
UC2000 CONTROL FEATURES 

09. TERM                      The reason for charge cycle 
                                       termination. All possible codes 
                                       are listed below: 

 

          

1-Charge Comp       Normal Charge Complete 

            2-Low Current          Low Current Error shutdown 
            3-Manual Stop         Manual stop 
            4-Battery Dis           Battery disconnected while 
                                            charging 
            5-<80 Backup          0-80% Back-up Timer Error 
                                            shutdown. 
            7-Cooling Int           CDAC function                                            
            8-CDAC Rej            CDAC Battery Rejection 
            9-Curve Error          Charger Output Curve Error      
                                            shutdown 
          11-Unbal Line           Unbalanced Input Line Error                                                
                                            shutdown 
          12-Didt                      Rising Current/Falling Voltage 
                                           Error shutdown   
          13-Lvsd                     Low Charging Voltage Error                                                                     
                                            shutdown 
          14-Ahsd                    Excessive AH Returned Error 
                                            shutdown 
          15-BID Read             BID Error Shutdown 

 

        

10. EQUALIZE TIME     The time of the equalize 
                                       portion of the charge cycle. 
                                       Equalize can be automatically 
                                       or manually selected. 

 

11. START TIME           The time at the start of the 
                                      charge cycle (AM/PM format). 

 

12. END TIME               The time at the end of the 
                                      charge cycle. Includes the 
                                      equalize time if it was          
                                      automatically or manually 
                                      selected (AM/PM format). 
 
13. TRUCK I.D.             The Truck I.D. number of the 
                                      truck that the battery was 
                                      discharged in prior to the 
                                      charge cycle. Requires 
                                      Prestolite Truck and Battery 
                                      Identification Modules   
                                      (TID and BID). 

 

14. BATTERY I.D.        The Battery I.D. number of the 
                                      battery that was charged in the 
                                      charge cycle.  Requires 
                                      Prestolite Battery Identification 
                                      Module (BID).                        

 

15. BATTERY VOLTS   The present voltage of the 
                                      battery connected to the 
                                      battery charger (volts DC).                                             

 

16. FAN RUN                The number of hours  
      HOURS (k)              (thousands) that the charger 
                                      fan (if equipped) has run.            
                          
 

17. BID START TEMP     The temperature of the battery 
                                        sensed by the Prestolite  
                                        Battery Identification Module 
                                        at the start of the charge cycle 
                                        (degrees F). 

 

18. BID END TEMP.        The temperature of the battery 
                                        sensed by the Prestolite 
                                        Battery Identification Module 
                                        at the end of  the charge cycle 
                                        (degrees F). 

 

19. PRESENT TIME 

 The present time (AM/PM 

                                        format). 

 

20. WEEK DAY               The present day of week 
                                        (SUN through SAT). 

 

21. EQUALIZE TYPE       The type of auto equalize 
                                        selected. The types that can  
                                        be selected are listed below: 
                                        
                            CYC.     =   By cycle count (see 
                                               AUTO EQ. COUNT). 

                                          

                         D.O.W.     =   By the day of week  
                                              (see Auto EQ. Day).                            

                                    

                              BID     =    By BID count 
 
22. EQUALIZE CYCLES  The number of charge cycles  
                                        between equalize charges 
                                        when the auto equalize  
                                        function is programmed “ON” 
                                        and the auto equalize type is 
                                        set to “COUNT”. 
                                       
23. EQ. DAY                   The day of the week that an 
                                        equalize charge cycle is 
                                        performed when the auto 
                                        equalize function is “ON” 
                                        and the auto equalize type 
                                        is set to “DAY”. 
                                     
24. AUTO EQUALIZE     Shows the auto equalize 
                                        function on or off. 

  

                                           Auto equalize “OFF” 
                                           Auto equalize “ON” 
 
25. T.O.D. START        Time of day start time. 
                                      (AM/PM). See START MODE.      
                                          
26. DELAYED START  Delayed start time interval. 
                                      (00H 00M to 23H 59M). 
                                      See START MODE. 
 
 
 
 

7-8                                                                                                                                          March 31, 2005 

Содержание ULTRA CHARGE







































































Отзывы:

Нет отзывов