Page 9
For technical questions, please call 1-888-866-5797.
Item 64017
Sa
F
ety
Opera
ti
O
n
Maintenance
Setup
Backlight and Worklight
1� Press the
B.L HOLD
button for
two or more seconds to turn on the
LCD backlight for 30 seconds�
2� Press the
B.L HOLD
button for
two or more seconds again to
turn the LCD backlight off�
3� While in current range modes,
turning the backlight on also
turns the clamp Worklight on�
note:
Frequent use of the backlight will
shorten the life of the batteries� Only
use the backlight when necessary�
Data Hold
The data hold function keeps the current reading on the Display� To activate data hold:
1� Press the
B.L HOLD
button and
the reading will be held on the
Display� The
symbol appears�
2� Press
B.L HOLD
again
to release the hold�
ncV (non-contact Voltage)
1� Turn Rotary Switch to
the
ncV
position�
2� Move the tip of the clamp close to the
unshielded conductor� If detected
voltage is >110V AC,
Meter will beep
and the NCV Indicator will flash�
WarninG!
even if no indication is
given, voltage may still be present.
Do not rely solely on NCV detection to
determine the presence of voltage�
auto power-Off
If the Meter is not used for approximately 15 minutes, it will automatically turn itself off
to conserve battery power� To turn the Meter back on after auto-off, press the
Func
button� To disable Auto Power-Off, hold the
Func
button while powering the Meter on�
