Page 12
For technical questions, please call 1-888-866-5797.
Item 64013
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
continuity Measurement
Test continuity between two
points of a circuit.
WARNING!
To prevent electric shock, turn
off all power and fully discharge capacitors
on the circuit under test before measuring.
1. Plug black test lead into COM Jack.
Plug red test lead into INPUT Jack.
2. Turn Rotary Switch to the
position.
3. Press SEL until is displayed.
4. Connect the test leads across
the circuit to be measured.
5. Read measured resistance on the
Display. If measured resistance is less
than 50Ω ± 20Ω, Meter will beep.
6. When testing is complete, turn
Rotary Switch to OFF, remove
Test Leads and store with Meter.
capacitance Measurements
Measure capacitance up to 100μF.
WARNING!
Turn off all power and fully
discharge capacitors on the circuit
under test before measuring.
1. Plug black test lead into
cOM
Jack.
Plug red test lead into
INpUT
Jack.
2. Turn Rotary Switch to the
position.
3. Press
SEL
button until
nF
is displayed.
4. Carefully touch capacitor
leads with tips of probes.
5. Read measured capacitance
on the Display.
Note:
If capacitor is short
circuited or capacitance is too
high, Display will read
OL.
6. When testing is complete, turn
Rotary Switch to
OFF
, remove
and store capacitor and Meter.
