6
98-0157 Rev P
2.4
Caution and Warning Statements
These instructions provide information on safe working practices. These should be adopted to
ensure safe and continuing operation of the equipment. The manual should be read and
understood before the equipment is placed into service.
AmeriWater
reserves the right to make engineering refinements to the equipment that may not be
described herein. Any questions that cannot be answered specifically by these instructions should
be addressed to AmeriWater
or their agents for a response.
AmeriWater
will not accept any responsibility for any equipment supplied or the actions of such
equipment or associated system when the customer has made a modification that is considered by
AmeriWater to compromise the integrity of the original design philosophy.
If the unit’s performance becomes impaired and any remedial work appears to be outside the scope
of this manual, then seek advice from
AmeriWater Technical Support
at telephone number
1-800-
535-5585.
Be prepared to provide
the unit’s serial number.
The unit must not be dismantled unless carried out by AmeriWater personnel or authorized trained
personnel.
Under no circumstances should the unit be connected to the electrical supply with the front control
panel open.
Always refer to the Material Safety Data Sheets before handling any of the recommended cleaning
chemicals.
There is the potential for sensitive equipment/devices located in close proximity to the
MediQA
unit
to be affected by electromagnetic or other interference generated from other units. If affected by
interference the relevant equipment/device should be relocated.
The use of mobile phones in close proximity to the
MediQA
unit should be avoided where possible.
The
MediQA
unit should only be pushed via the frame when the casters are down. Pushing on the
plumbing, the control panel, or the pump could result in damage to the unit.
The
‘Caution’
symbol is used throughout this manual to highlight where particular care must be
taken to ensure the safety of the operator, and the protection provided by the equipment, is not
impaired.
Содержание 00MDP2-230
