AmeriWater 00HRO64800, Руководство по эксплуатации и техническому обслуживанию

Страница: 22 / 37

21
FACTORY AS
SETPOINT DESCRIPTION RANGE SETTING SHIPPED
Flush Interval The interval between flush cycles. 0-99 0 24
Only valid with operation hour, minutes
elapsed time or off flush types.
Flush Mode Selects if the inlet and RO pump 1-4 0 0
relays operate during flush.
Maximum Hours If the current operating hours exceed 0-65000 0 0
this limit, the operating hours warning hours
will occur. To disable, set to 0.
Current Hours Current number of hours of RO 0-65000 0 2
system operation. hours
Expander Mode Not Used -
Temp Offset Allows adjustment of temperature + 5 0 0
reading by +-5 degrees.
Temp UOM Selects display of temperature in 0-1 0 0
°
F or
°
C
Switch Select Selects if switch inputs are normally 0-32 0 0
open or normally closed.
TDS/Cond UOM Selects display of water quality in uS 0-1 0 0
or PPM
NOTE: If this Setpoint is changed,
the unit must be recalibrated.
TDS/Cond Range Selects range of TDS/Conductivity 0-6 1 1
monitor 0-50, 1-100, 2-250, 3-500,
4-1000, 5-2500, 6-5000
NOTE: If this Setpoint is changed,
the unit must be recalibrated.
C2 Range Selects range of TDS/Conductivity 0-6 4 4
monitor 0-50, 1-100, 2-250, 3-500,
4-1000, 5-2500, 6-5000
NOTE: If this Setpoint is changed,
the unit must be recalibrated and
range components may need to be
changed.
FACTORY AS