American Technologies Network ATN PS31 Скачать руководство пользователя страница 2

Страница: 2 / 33

SAFETY SUMMARY

CAUTIONS

• The ATN PS31 is a precision optical instrument and must be han-

dled carefully at all times to prevent damage.

• Do not scratch the external lens surfaces or touch them with your

fingers.

• To protect the image intensifier, keep the lens cap on the objective

lens when the goggles is not in use or when checked out in daylight

conditions.

• The IR illuminator is the light that is invisible to the unaided eye

for use during conditions of extreme darkness. However, the light

from the illuminator can be detected by others when using night

vision devices.

• If you use the rubber eyecups for a long period of time, you may

suffer skin inflammation. If you develop any symptoms, consult a

doctor immediately.

WARNING

Do not carry batteries in pockets containing metal objects such as

coins, keys, etc. Metal objects can cause the batteries to short cir-

cuit and become very hot.

The information in this manual is furnished for information use only, is subject

to change without notice, is not to be construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liability for any errors or

inaccuracies that may appear in this book.
© 2020 ATN Corp. All right reserved.

THIS PRODUCT CONTAINS NATURAL RUBBER LATEX WHICH MAY

CAUSE ALLERGIC REACTIONS.

CAUTION :

Register your product warranty online at

www.atncorp.com/warranty

Содержание ATN PS31


































Результаты поиска

Содержание ATN PS31

Отзывы:

Похожие инструкции для ATN PS31

Бренды по названию

Популярные бренды

American Technologies Network ATN PS31, Руководство оператора

Результаты поиска

Содержание ATN PS31

Отзывы:

Похожие инструкции для ATN PS31

Бренды по названию

Популярные бренды