American Technologies Network ATN PS31 Скачать руководство пользователя страница 10

Страница: 10 / 33

1-10

1-11

1.3. PRINCIPLES OF OPERATION

1.3.1. MECHANICAL FUNCTIONS

The mechanical functions of the NVG allow for differences in the

physical features of individual operators and provide for operating

the system. These functions include the power switch, eye relief ad-

justment, diopter adjustment, and objective focus. The mechanical

controls are identified in Figure 1.3.

1.3.2. OPTICAL FUNCTIONS

The optical functions include an objective lens, image intensifier

and eyepiece lens (Figure 1.4.). The objective lens collects light

reflected from the night scene by the moon, stars, or night sky, in-

verts the image and focuses that image on the image intensifier.

The image intensifier converts the captured light into a visible im-

age and reinverts the image which can then be viewed through the

eyepiece lens.

PHOTOCATHODE

MICROCHANNEL

PLATE

FIBER-OPTIC INVERTER

PHOSPHOR

SCREEN

OBJECTIVE

LENS

IMAGE

INTENSIFIER

POWER

SUPPLY

EYEPIECE

LENS

EYE

FIGURE 1.4. OPTICAL FUNCTION DIAGRAM

1.3.3. ELECTRONIC CIRCUIT FUNCTION

The electronic circuit regulates the direct current voltage from the

battery to the image intensifier and IR source as required. It also

monitors the output voltage of the battery and turns on a low-bat-

tery indicator when the available battery voltage is 1.9–2.1 Vdc.

a. Power Source

The electronic circuit is powered by one battery.

b. Auto Mode

The automatic mode is different from the “IR” mode, and the auto-

matic mode starts the environment detection sensor. It can detect

environmental luminance in real time and work with reference to the

illumination control system. Under extremely low or extremely dark

environment, The system will automatically turn on infrared aux-

iliary lighting, and when the environmental illumination can meet

normal observation, The system automatically turns off “IR”, and

when the ambient illumination reaches 40–100 Lux, The whole sys-

tem is automatically shut down to protect the photosensitive core

components from damage by strong light.

Содержание ATN PS31


































Результаты поиска

Содержание ATN PS31

Отзывы:

Похожие инструкции для ATN PS31

Бренды по названию

Популярные бренды

American Technologies Network ATN PS31, Руководство оператора

Результаты поиска

Содержание ATN PS31

Отзывы:

Похожие инструкции для ATN PS31

Бренды по названию

Популярные бренды