8
9
3. Use a thin object (small coin, paper
clip) to lock the microSD card in place after
inserting it into the slot.
4. Return the cover to its original position.
NOTE
There is only one correct direction to
insert the microSD Card.
Do not force the microSD Card into the
port doing so may cause damage to both
the monocular and the card itself.
To remove the microSD Card from the
port, push the card slightly in using the
same thin object you did before. When the
card pops up a few millimeters, pull the card
out with your fingers or tweezers.
NOTE
If you are going to record video, the
microSD Card should be a Class 10 (10 Mb/
sec) or faster and have capacity from 4 to
64 Gb that is an HC type SD card.
FIRMWARE UPDATE
Before operating your device, update the firmware to the latest version. All
firmware updates can be found on at
https://www.atncorp.com/firmware
.
To receive a notification concerning new firmware updates, please register
your device on our website. An email notification will be sent when a new firm-
ware update becomes available.
To update the firmware you will need a microSD Card and fully charged
internal battery.
NOTE
In the event of a power failure during an update, the device may crash.
This will corrupt the system files and the device will need to be sent back
to the ATN factory for service.
Update the new firmware as follows:
1. Download the
***.bin
file and copy to your microSD Card — root directory.
2. Insert the card into the mon-
ocular.
3. Turn ON the monocular.
4. In the “Firmware Update”
dialog box select “Yes” to
start the update.
5. When the update counter
reaches “100%” the device
will automatically restart.
6. Once the device is powered
up it will enter self configuration mode.
7. After completing it will automatically restart.
8. Motion Sensing platform will be configured when first turned on.
9. Once the Firmware update completes, please do a factory reset before
using the product.
10. Please delete the Firmware file off of the microSD card after the process
is complete. Or the system will try to update the Firmware every time you
turn the monocular on.
NOTE
If the device does not restart within 30 seconds, press and hold the
power button for 15 seconds and the monocular will turn off.
ON/OFF
To TURN ON the device press and hold
the POWER button until you see the ATN
splash screen.
To TURN OFF the device press and hold
the POWER button, until the dialog box
“Shut down the device?” appears. Choose
“Yes” to turn off.
If the monocular freezes or stops
responding to the control panel. Press and
hold the Power button for 15 seconds to
reboot the monocular.
USING YOUR KEYPAD AND SCROLL WHEEL
The KEYPAD is programmed to be used
in two different ways:
• Short and Quick Taps — used for most
functions and to get around the menu.
• Press and Hold — designed to be
used in the following situations — ON/
OFF, SHORTCUT MENU.
• You can use the Power and Function
buttons in System Menu as Up and
Down buttons.
• The Scroll Wheel is used to magnify
your target from the Home Screen.
NOTE
Using LEFT or RIGHT buttons in the Menu. You can quickly choose
Exit Shortcut from any position. Use the Function Button from any menu
screen to exit to the Home Screen by pressing and holding down the
Function button for a few seconds.
FOCUSING
DIOPTER ADJUSTMENT
By rotating the Diopter Adjustment Ring
you will achieve optimal sharpness for your
vision. Look through the eyepiece while
focusing on the widgets on the screen.
NOTE
Once the Diopter Adjustment is set
to your liking, adjustment will not need
to be performed unless another user
altered the focus for their needs.
DIOPTER
ADJUSTMENT RING
