6
TEST INSTALLED FITTING
7
ADJUST HOT LIMIT STOP
By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT
SAFETY STOP reduces risk of accidental scalding. To set the maximum hot water temperature of your faucet,
all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP
(1)
.
Use a flat blade screwdriver or your fingers to pull up and rotate red HOT LIMIT SAFETY STOP
(1)
. Follow
Step "A"
or
"B"
to adjust min./max. discharge temperature.
"0"
being the hottest to
"7"
the coldest temperature setting. Factory
set at
"0"
.
With HANDLE
(1)
in OFF position, turn on
WATER SUPPLIES
(2)
and check all
connections for leaks.
Remove AERATOR
(3)
.
Operate HANDLE
(2)
up and down, in COLD and HOT
positions, to flush water lines thoroughly.
Direct SPRAY HEAD
(3)
into sink. Open faucet and
activate spray. Check SPRAY HOSE
(4)
connections
for leaks.
Replace AERATOR
(3)
.
8
PRY RED RING FORWARD
AND ROTATE COUNTER-
CLOCKWISE ONE CLICK
PRY RED RING FORWARD
AND ROTATE CLOCKWISE
"A"
ADJUSTMENT WHEN
WATER IS TOO HOT
"A"
"A"
"B"
"B"
ADJUSTMENT WHEN
WATER IS TOO COLD
"B"
"RED RING"- HOT
LIMIT SAFETY STOP
TEMPERATURE
SETTING NUMBERS
0
1
2
3
4
5
6
1
M66240 REV.1.1
1
3
2
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL
CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS,
OR A CLOTH WITH A COARSE SURFACE.
CARE INSTRUCTIONS:
