American Panel Walk-in Monitoring System 100, Руководство пользователя

Страница: 4 / 20

INTRODUCTION
2
1 Introduction and Features
WALK-IN MONITORING SYSTEM 100 (WIMS 100) was designed by American Panel Corporation to
address multiple issues regarding walk-in units and to incorporate the functionalities of various walk-in door
devices in a single flexible, reliable, and user friendly controller.
WIMS 100 features:
Walk-in Temperature Monitoring
Walk-in Temperature Alarms
External Alarm Output With Direct 115VAC, Up To 150W
Door Frame Heater Temperature Controlling
Door Frame Heater Temperature Monitoring
Electronically Controlled Light Switch With Light On/Off Indicator
Automatic Light Off
External Switch Connection For CAL-OSHA Back-To-Back Light Control (Optional)
Celsius Or Fahrenheit Temperature Selection
Real Time Clock With Backup Battery And Automatic Recharge Function
1.1 Temperature Monitoring and Alarms
To efficiently monitor the walk-in air temperature, WIMS 100 is equipped with a highly accurate temperature
probe mounted inside the walk-in. The ultra bright LED display indicates the air temperature at all times.
The controller alarm system is comprised of a high and low temperature alarm with built in trigger delay to
allow small temperature fluctuations (occurring in daily walk-in operations such as door openings, door
closings, and evaporator defrost cycles) without triggering the alarms. The alarm’s set points and delay times
are fully programmable to the user’s needs.
In case the air temperature inside the walk-in is reaching an alarm condition, WIMS 100 uses visual and audible
alert methods. In addition to the integrated buzzer and alarm display message, the controller has a
115V/60Hz/150W output for additional external alarm devices (optional).
1.2 Door Frame Heater Temperature Control and Monitoring
Door frame heater control and monitoring is done by two different methods that work in conjunction to save
energy and to maintain the door frame heater temperature within a preset range.
A temperature probe is mounted on the door frame heater wire to accurately monitor its temperature. Viewing
the door frame heater temperature is as easy as pressing a button.
1.3 Electronically Controlled Light Switch and Automatic Light Off
The flexibility of WIMS 100 allows the user to operate the light from multiple locations such as multiple doors.
The integrated light button is equipped with two LED lights to display the ON/OFF status of the light and also
to indicate the button location in the dark.
The Automatic Light Off feature of WIMS 100 enables the user to save energy. The amount of time the light
will stay on can be set from 1 minute to 60 minutes, or can be set for manual shut off only.
Back-to-back light control is provided as an optional feature.