American Megatrends Megathon Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 55

background image

Megathon PCI Motherboard User’s Guide

ii

© Copyright 2000 American Megatrends, Inc.
All rights reserved.
American Megatrends, Inc.
6145F Northbelt Parkway
Norcross, GA 30071

This publication contains proprietary information which is protected by copyright. No part of this publication may be reproduced,
transcribed, stored in a retrieval system, translated into any language or computer language, or transmitted in any form whatsoever without
the prior written consent of the publisher, American Megatrends, Inc.

Limited Warranty

Buyer agrees if this product proves to be defective, that American Megatrends, Inc. is obligated only to replace or refund the purchase price
of this product at American Megatrend's discretion according to the terms and conditions on the motherboard warranty card. American
Megatrends shall not be liable in tort or contract for any loss or damage, direct, incidental or consequential. Please see the Warranty
Registration Card shipped with this product for full warranty details.

Limitations of Liability

In no event shall American Megatrends be held liable for any loss, expenses, or damages of any kind whatsoever, whether direct, indirect,
incidental, or consequential, arising from the design or use of this product or the support materials provided with the product.

Trademarks

AMD Athlon is a registered trademark of Advanced Micro Devices.
VESA is a registered trademark of the Video Electronics Standards Association.
MS-DOS, Microsoft Word, and Microsoft are registered trademarks of Microsoft Corporation. Microsoft
Windows, Windows NT, and Windows 95 are trademarks of Microsoft Corporation.
IBM, AT, XT, CGA, VGA, PS/2, OS/2, and EGA are registered trademarks of International Business Machines
Corporation.
Fujitsu is a registered trademark of Fujitsu America, Inc.
Motorola is a registered trademark of Motorola Corporation.
Hitachi is a registered trademark of Hitachi America, Ltd.
PNY is a registered trademark of PNY Corporation.
Oki is a registered trademark of Oki America, Inc.
NEC is a registered trademark of NEC Corporation.
Micron is a registered trademark of Micron Corporation.
SCO, Unix, and UnixWare are registered trademarks of the Santa Cruz Operation, Inc.
All other brand and product names are trademarks or registered trademarks of their respective companies.

Revision History

2/9/00

Initial release.

«
1
2
3
4
...
»

Содержание Megathon
























































Отзывы:

Нет отзывов

Похожие инструкции для Megathon

Бренд: hager Страницы: 4

Бренд: SurfLink Страницы: 9

Бренд: Giada Страницы: 2

Бренд: BESTEK Страницы: 52

Бренд: TYAN Страницы: 90

Бренд: Gigabyte Страницы: 80

Бренд: Texas Instruments Страницы: 14

VVDI Mini Key Tool

Бренд: Xhorse Страницы: 17

STEVAL-LLL002V1

Бренд: STMicroelectronics Страницы: 29

Бренд: Texas Instruments Страницы: 20

Бренд: Norco Страницы: 60

Бренд: AOpen Страницы: 125

Бренд: ST Страницы: 47

Бренд: Rohm Страницы: 8

Бренд: ASROCK Страницы: 47

Бренд: Intel Страницы: 62

Бренд: unicore Страницы: 29

Бренд: unicore Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды