American Megatrends MegaRAC G4, Руководство пользователя

Страница: 37 / 66

Chapter Four : Using Your MegaRAC® G4 27
Alert List
On this page you can configure alert destinations. To delete an alert, select it and press
Delete. To create a new alert, select a “Not Configured” alert table entry and click
‘Modify’ button.
Item Description
Alert # Number of alert configuration entry. There are 15 alert configuration entries
in the system.
Alert Level This is associated with the severity of the event that causes the alert.
Destination
Address SNMP destination IP address for the configured alert entry.
Modify Button Use this button to add a new alert configuration entry or modify an existing
one.
Send Test Alert
Button Use this button to test the selected alert configuration entry.
Alert - Modify Alert
Please enter the information for the new alert below and press Save.
Item Description
Event Severity You select the severity of the event that you want to trigger an alert.
•
Disable All
•
Informational
•
Warning
•
Critical
•
Non-recoverable
Destination IP Type the SNMP destination IP address into this field.
Cancel Button Use this button to cancel this action.
Save Button Use this button to save your settings.
Send Test Alert
To send a test alert, select it and select the
Send Test Alert button.