American Megatrends MegaRAC G4, Руководство пользователя

Страница: 15 / 66

Chapter Two : Installing Your MegaRAC® G4 Card 5
MegaRAC® G4 Card Layout and Connection Guide
USB In
Network
VGA In
J10 RS232 Serial Port
J5 Recovery/ Configuration
J18 MegaRAC Feature Connector
J16 & J17 Must Be Shorted
J14 & J15 I2C Clock/Data PCI Bypass
Host System’s Motherboard PCI Slot
VGA Splitter Cable
RJ-45 Network Cable
Plug the AC Adapter here (optional)
To the MegaRAC G4
(USB In)
To Host System’s USB Port
Power On Cable
(Runs between
the MegaRAC G4
and the Power On
Switch located
on Front Panel of
the Host System) Power On Cable
(Runs between the
MegaRAC G4 and the
Power On Header located
on the Host System’s
Motherboard)
Reset Switch Cable
(Runs between
the MegaRAC G4
and the Reset
Switch located
on Front Panel of
the Host System)
Reset Switch Cable
(Runs between
the MegaRAC G4
and the Reset
Header located
on the Host
System’s
Motherboard)
I2C Cable
(Optional, with Limitations. Runs between the
MegaRAC G4 and the IPMB Header located
on the Host System’s Motherboard)
To the Monitor
(15-pin Female)
To the MegaRAC G4
(15-pin Female)
To the Host System’s
VGA Port
(15-pin Male)
MegaRAC Feature
Connector Cable
(not to drawn to scale)
Warning
The MegaRAC G4 USB Cable is specifically designed for the MegaRAC G4, revision E PCB and newer
revisions only. Do not use the MegaRAC G4 USB Cable for any other MegaRAC device.
Step 2 Plug in the MegaRAC® G4 card into the Host System and Attach
Internal Cables
Physically plug in the MegaRAC® G4 card into any available PCI slot inside the host
system.
Secure the card into the chassis.
Plug the card into a standard PCI slot.
Secure the I/O shield of the card
to the card mounting on the chassis.