American Megatrends 42 Series, Руководство пользователя

Страница: 43 / 93

AMIBIOS Displayed Messages
Error messages are displayed in the following format:
ERROR Message Line 1
ERROR Message Line 2
Press the <F1> key to continue
and the system halts. The system does not halt if Wait for <F1> If Any Error in ADVANCED CMOS SETUP is Disabled.
Error Message Explanation
8042 Gate-A20 Error Gate A20 on the 8042 keyboard controller is not working.
Replace the 8042.
Address Line Short! Error in the address decoding circuitry on the motherboard.
C: Drive Error No response from hard disk drive C:. Drive C: may be missing.
Run the Hard Disk Utility. Also check the C: hard disk type in
STANDARD CMOS SETUP.
C: Drive Failure No response from hard disk drive C:. It may be necessary to
replace the hard disk.
Cache Memory Bad, Do
Not Enable Cache! Cache memory on the motherboard is defective. Run AMIDiag.
CH-2 Timer Error Most AT motherboards have two timers. An error occurred in
Timer 2.
CMOS Battery State Low CMOS RAM is powered by a battery. The battery power is low.
Replace the battery.
CMOS Checksum Failure After configuration values are saved, a checksum value is
generated for error checking. The previous value is different
than the current value. Run AMIBIOS Setup.
CMOS System Options
Not Set The configuration data in CMOS RAM is either corrupt or
nonexistent. Run AMIBIOS Setup.
CMOS Display Type
Mismatch The video type in CMOS RAM does not match the type
detected. Run AMIBIOS Setup.
CMOS Memory Size
Mismatch The amount of memory on the motherboard is different than
the amount in CMOS RAM. Run AMIBIOS Setup.
CMOS Time & Date Not
Set Run STANDARD CMOS SETUP to set the date and time in
CMOS RAM.
D: Drive Error No response from hard disk drive D:. Drive D: may be missing.
Run the Hard Disk Utility. Also check the D: hard disk type in
STANDARD CMOS SETUP.
D: drive failure No response from hard disk drive D:. It may be necessary to
replace the hard disk.