American Megatrends 16 Series Скачать руководство пользователя страница 93

Страница: 93 / 128

American Megatrends Enterprise-II Motherboard User's Guide

Media Analysis Utility

The Media Analysis utility performs a

series of tests to locate bad or damaged

tracks on the hard disk as a result of

aging or poor handling. This utility

locates all bad tracks and lists them in

the Bad Track List Box. Since this test

writes to all cylinders and heads on the

hard disk to verify any bad tracks, the

test requires several minutes to complete.

For best results, run this test in its

entirety. Media Analysis does not work on

IDE or SCSI drives.

Select Media Analysis from the main Hard

Disk Utility Menu and press <Enter>. The

following screen appears.

Media Analysis Screen

The cursor is on Proceed. The warning

screen appears. Press <Enter> to stop. The

main Hard Disk Utility screen appears.

Type Y and press <Enter> to perform the

hard disk drive analysis.

Содержание 16 Series

































































































































Результаты поиска

Содержание 16 Series

Отзывы:

American Megatrends 16 Series, Руководство пользователя, Страница: 93 / 128

Результаты поиска

Содержание 16 Series

Отзывы: