American-Lincoln
Technology
3366XP / 4366XP
6
- FORM NO. 56041668
WATER TEMPERATURE GAUGE
HOUR METER
FUEL GAUGE
OIL GAUGE
VOLT METER
BROOM & FAN SWITCH
SHAKER MOTOR SWITCH
RIGHT SIDE
BROOM LIFT
WET SWEEP BYPASS
(OPTION)
IGNITION SWITCH
TURN SIGNAL (OPTION)
FOOT BRAKE
ACCELERATOR &
DIRECTIONAL
CONTROL PEDAL
BACKUP ALARM SWITCH
(OPTION)
SEAT ADJUSTMENT
HORN
LIGHT SWITCH
(OPTION)
WORK LIGHT
SWITCH (OPTION)
MAIN BROOM LIFT
LEFT SIDE BROOM
LIFT (OPTION)
CHECK ENGINE LIGHT (GAS/LP)
THROTTLE CONTROL
GAS/LP
DIESEL
HOPPER ROTATE
& DUMP
HOPPER LIFT
CIRCUIT BREAKERS
PARKING BRAKE
GLOW PLUG (DIESEL)
P4586ecp
FIGURE 2
OPERATION OF CONTROLS AND GAUGES
WATER TEMPERATURE GAUGE (See Figure 2)
The water temperature gauge is located on the instrument panel to the left of the fuel gauge. The gauge is activated by a sender in
the engine. It displays the engine water temperature in °F.
HOUR METER (See Figure 2)
This meter is located to the left of the oil pressure gauge on the instrument console. This meter is activated when the engine begins
running. The meter indicates actual “run” time of the machine. The meter can be used to indicate when maintenance should be
done to the machine.
FUEL GAUGE (See Figure 2)
The fuel gauge is located between the water temperature gauge and the volt meter on the instrument panel, and indicates the level of
fuel contained in the fuel tank.
OIL PRESSURE GAUGE (See Figure 2)
The oil pressure gauge is located on the instrument panel to the right of the hour meter. The gauge is mechanical and activated by a
sender in the engine. It displays the engine oil pressure in PSI.
VOLT METER (See Figure 2)
The volt meter is located on the control panel to the left of the fuel gauge. The meter indicates the charging or discharging of the
battery. When the key is in the accessory position the gauge will register approx. 12 volts. The meter will indicate approximately 13
to 14.5 volts when the engine is running. This indicates that the alternator is working correctly.
