American-Lincoln
Technology
3366XP / 4366XP
12
- FORM NO. 56041668
OPERATION OF CONTROLS AND GAUGES
CHECK ENGINE LIGHT (Gas, LP Only) (See Figure 10a)
The check engine light (MIL) is located on the left side console. If the light comes on, it indicates a problem with the engine. Go to the
GM Engine Service Manual, Section 7, for directions on how to diagnose the problem.
LEFT SIDE BROOM LIFT AND POWER CONTROL (OPTION) (See Figure 10)
The left side broom lift control is located on the left side of the instrument panel. To raise and stop the side broom, grasp the lever
and push the lever to the locking notch marked “UP”. To lower the side broom, grasp the lever and push it up to the right away from
the locking notch. Let the lever lower until it rests by the “DOWN” mark. To turn “ON” the side brooms, move the Hopper Lift/Side
Broom Lever forward to the “ON” position.
MAIN BROOM LIFT (See Figure 10)
The main broom lift control is located to the left of the driver’s seat. To lower the main broom, grasp the lever and push up and to the
left to clear the locking notch. Move the lever down to the
fi
rst or second notch in the elongated slot. The
fi
rst notch, “SWEEP”, is for
normal sweeper (2 to 3 in. or 5 to 8 cm. broom pattern). The second notch, “FLOAT”, is for heavy sweeping (4 to 5 in. or 10 to 13 cm.
broom pattern), To raise the main broom, push the lever up and slide into the locking notch in the “UP” position. You may operate the
main broom in either the “SWEEP” or “FLOAT” position. However, the “SWEEP” position should be used for normal sweeping and will
result in increased broom life. The “FLOAT” position should be used only when sweeping in extremely uneven areas.
WORK LIGHT SWITCH (OPTION)
The work light switch is located under the light switch to the left side of the steering wheel. It allows the operator to work the rear work
light option when the headlights are on.
LIGHT SWITCH (OPTION)
The light switch is located under the horn to the left side of the steering wheel. It will work various light options that are available for
this machine, such as:
- Head
Lights
- Tail
Lights
-
Side Broom Lights
- Instrument
Lights
All gauges with the exception of the hour meter can have an option internal instrument light.
HORN BUTTON
The horn button is located to the left of the steering column. The horn button is always active. Push the horn button to sound the
horn.
CAB (OPTION)
The all-weather cab is available for this machine along with several “cab only” options:
- Windshield
Wipers
- Defroster
Fan
- Interior
Light
- Pressurizer
These options have their controls located on the cab.
LOW OIL SHUTDOWN
This engine is equipped with a low oil pressure shutdown. If the engine oil pressure drops too low, the engine will shut down. Add
engine oil until the oil is brought up to the correct level.
