American-Lincoln 3366 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 56

background image

American-Lincoln

1-25

3366XP

SAFETY REQUIREMENTS

1.

Keep cigarettes, sparks, and open flame away when working on LP equipment, when inspecting for gas
leaks or when LP tanks are present.

2.

Check all components for proper operation. Replace LP components when needed. Never by-pass
defective safety components.

3.

Check routing of all LP hoses. Keep them away from sharp edges, exhaust manifolds, or other hot
surfaces. Check for signs of abrasion or deterioration.

4.

Check for gas odor before and during starting operations. If gas odor is noticed, stop and check for leaks
or component malfunction.

5.

Make sure LP tank is free of dents or gouges.

6.

Make sure service coupling is clean and free of damage. Make sure service coupling of tank matches
machine service coupling.

7.

Keep the engine properly tuned.

8.

Make sure the LP tank matches the fuel system.

9.

Make sure LP tank is securely mounted on the machine with the retainer bracket clamping the tank, and
with the locating pin in position.

10. Park the machine in a shaded, cool area when not in use.
11. Keep the LP tank service valve closed when the tank is not in use.
12. Never overfill LP tank. Fill the LP tank to the recommended weight stamped on the tank.
13. Use care in handling LP tanks. Never drop or drag them.
14. Always store and transport LP fuel tanks with the safety relief valve in the “UP” position.
15. Avoid contact with the LP fuel to avoid frostbite.

When the machine is to stand unused for a period of time, overnight for example, park the machine in a
designated area, shut off the service valve at the tank and operate the engine until the remaining fuel is
consumed. Then, turn off the ignition switch.

LP CHECK LIST

This checklist can be made quickly. Be sure to make all of the checks listed on the maintenance chart.

1.

Check connections for leaks.

2.

Open the LP storage tank valve.

3.

Check the regulator. Momentarily press fuel primer on the regulator cover to bleed air out of the system.
See Figure 15.

4.

Start the engine.

LP POWERED MACHINES

LPG

INLET

PLUG

VAPOR
OUTLET

P-4563A

WATER

MOUNTING HOLES

P4563a

FIGURE 15

«
...
24
25
26
27
28
...
»

Содержание 3366

























































Отзывы:

Нет отзывов

Похожие инструкции для 3366

Бренд: Kärcher Страницы: 5

Бренд: JK Audio Страницы: 16

Бренд: Uniden Страницы: 95

Neofold HS 1250

Бренд: Neolt Страницы: 114

Бренд: Tennant Страницы: 6

Бренд: Janome Страницы: 52

Бренд: Innovatech Страницы: 25

ZEPHIRO 1000ST HAZE

Бренд: soundsation Страницы: 28

Бренд: JUKI Страницы: 15

Panafax UF-4100

Бренд: Panasonic Страницы: 4

Panafax UF-4100

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 54

Бренд: Panasonic Страницы: 72

Бренд: Panasonic Страницы: 72

KXF100 - CONSUMER FACSIMILE

Бренд: Panasonic Страницы: 54

Бренд: Panasonic Страницы: 68

Бренд: Panasonic Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды