17265
Using a ½” socket and ratchet and wrench, remove the four bolts that
secure the hood to the frame so the hood can be lifted off the unit. The
bolts are located on either side of the unit behind the model decal and at
the front of the unit on either side of the hood logo. See figure 1 .
Remove the cover from the electrical cover with a 5/16” socket or
wrench. See figure 2.
Slide the t-slot nut into the channel on the soundbar housing, with one at
each end of the channel. Tighten the screws to secure them in place.
figure 1
figure 3
figure 2
figure 4
STEP 1
Using the four M5 x 10mm socket head cap screws, secure the t-slot nut
to the retaining side of the pipe clamp with a 4mm allen wrench. Do not
tighten these screws. See figure 3.
STEP 3
STEP 2
STEP 4
