17265
Using a strap, or with someone’s help to hold the soundbar in place on
the crossmember, secure the hooked end of the retaining side of the
pipe clamp to the hooked end of the clamp side. With even pressure,
push the clamp portion over the bar and start the M5 x 15mm screws
that hold the clamp side in place with a 4mm allen wrench. Repeat for
the other side. Do not tighten the screws. See figure 5.
Center the soundbar on the crossmember and ensure that it will not
interfere with the roof. On standard units the soundbar will be on the
rear of the crossmember, on crew units the soundbar will be mounted on
the front side of the crossmember. Once center, tighten all hardware.
See figure 5.
figure 5
figure 7
figure 6
STEP 5
Route the power supply down the drive side of the frame (passenger for
crew units) until you reach the dash. Be sure the power supply is on the
inside of the frame. Secure with included zip ties. See figure 5.
STEP 7
STEP 6
