RM4200 Series User Guide
RM4210 & RM4211 Installation
23
Testing Satellite Reception
Before completing the final installation, you can ensure that the RM4210 or RM4211 has adequate satellite
signal to communicate with the Bullhorn Web account using Bullhorn Tools. If reception is minimal, the unit may
not be able to send information to the website. The
Radio SNR
reading should be
at least
40 dB for a stable
communication link with the satellite. If this reading falls below 37 dB, contact Technical Services for instructions.
You can also email Technical Services by tapping
in Bullhorn Tools Mobile, which will include unit information
and a log file with your email.
1
Activate the unit by swiping a magnet across the access point on the unit (marked with an arrow on the
enclosure). A red light flashes to indicate that the unit is waiting to pair with your device. Once the unit
has paired with your device, the light will stop flashing and remain on.
Figure 2-18. RMU Access Point - Activated
2
Ensure that Bluetooth
®
is enabled on your computer or device.
3
Open Bullhorn Tools.
4
Click the unit name and then
Connect
. Or tap the name of the unit if using Bullhorn Tools Mobile. The
unit name includes the unit serial number (
S/N
), which can be found on the Bullhorn sticker on the
dome. The RM4210 label is shown as an example.
Figure 2-19. RM4210 Unit Label
