RM4200 Series User Guide
Configuration
49
5
Tap
Update
when finished.
6
Tap
at the top of the screen to return to the previous screen.
7
Repeat for each Reading as needed.
Switching Over-Current
If a relay is in an alarm state and needs to be reset, tap
Reset Over-Current
on the main unit configuration
screen.
Setting a Transmission and Measurement Schedule
W
ARNING
:
For Android devices, be sure to tap the
Update
button to save and apply changes. If you tap the
at the top of the screen or the Android
back icon, the changes may not be applied to the settings.
1
Tap
to open the
Reporting and Power
screen.
2
For transmission settings (when measurements are sent to Bullhorn Web):
a
Tap
Interval
and select an interval: Day of Month, Daily, or Weekly.
b
Tap
Start Time
and select a time.
c
For
Day of the Month
interval, tap
Day of Month
and select the number for the day of the month
when the transmission will be sent. You can select up to four days.
d
For
Weekly
interval, tap
Day of Week
and select the day when the transmission will be sent.
W
ARNING
:
The schedule for how often measurements are taken cannot be more often than when
transmission are made.
3
For measurement schedule settings (when measurements are taken):
a
Tap
Interval
and select an interval: Day of Month, Quarter-Hourly, Hourly, Daily, or Weekly.
b
Tap
Start Time
and select a time.
N
OTE
:
Quarter-Hourly, Hourly, and Daily intervals only require a Start Time.
c
For
Day of the Month
interval, tap
Day of Month
and select the number for the day of the month
when the transmission will be sent. You can select up to four days.
