REV. 4-6-2010
Page 9 of 11
4. Use the
Latching Solenoid
mode when connecting to a Hi/Lo solenoid and the
DC Motor Drive
mode when using
the Hi/Lo DC motor drive.
5. When the (AF-4000MOT) Hi/Lo Step Motor is used the 4 pin connector from the step motor connects directly into the
4 pin AUX connection on the (AF-4000MOD)
Figure #13
Direct Spark Ignition Operation (DSI) (optional)
The AF-4000 series gas valve may be used in conjunction with the AF-5000MOD direct spark ignition control for
DSI operation.
1. For operation with the direct spark ignition control module (AF-5000MOD), both pilot outlets (side and rear) must
be plugged.
2. Follow the AF-5000MOD control instructions for wiring and additional directions on using the AF-4000 series gas
valve in a direct spark ignition configuration.
Fire or explosion hazard. Can cause property damage, severe injury or death.
1. Stand away from the main burner while lighting, Hidden gas leaks can cause flashbacks in the appliance.
2. Check for gas leaks with rich soap and water solution any time work is done on a gas system.
Gas Leak Test
1. Paint the pipe connectors upstream of the gas control with rich soap and water solution, Bubbles indicate a gas leak.
2. If a leak is detected, tighten the pipe connections.
3. Light the main burner.
4. With the main burner in operation, paint the pipe joints (including adapters) with rich soap and water solution.
5. If another leak is detected, tighten the adapter screws, joints, and pipe conections.
6. Replace part if leak cannot be stopped.
(4) Pin AUX Connectors
18”
Battery Pack to Module
Wiring Harness
RED Wire
Black Wire
1/4” Female
Terminals
Striped & Tinned
Solenoid or DC motor Drive
Wiring Harness
HI/LO Connection
RED Wire
HI/LO Connection
BLACK Wire
Module Battery Pack Back
4 Pin AUX
Connection
HI/LO Connection
RED Wire
HI/LO Connection
BLACK Wire
Module Battery Pack Front
Requires 4-AA 1.5V
alkaline batteries
Module Battery Pack
Bat
tery
cov
er s
lide
s on
/off
Latching Solenoid
DC Motor Drive
Latching Solenoid
DC Motor Drive
f i r e - p a r t s . c o m
