American Dynamics VideoEdge, Инструкция по установке и эксплуатации

Страница: 34 / 60

Web Configuration
3-16 Installation and User Guide
Figure 3-9 Add/Edit user page
4 Enter or change the Name and Password fields as required.
5 Select Enabled from the State drop down menu to enable the user’s account. Selecting
Disabled will disable the user’s account preventing them from logging in. The default setting is
Enabled for new user accounts.
6 If the user is to have administration rights select Enabled from the Administrator drop down
menu. The default setting is Disabled for new user accounts.
7 Select Done to return to the main security detail page, as shown in Figure 3-8
8 If all users have been added or updated then select Done to return to the IP Encoder Main
Configuration page.
9 If all the required changes have been made to the IP Encoder configuration then select Save
Config to ensure all changes have been saved. Refer to Procedure 3-19 for more information
on saving configuration changes.
Note
At least 1 of the 10 accounts must have Administrator rights.