American Dynamics VideoEdge, Инструкция по установке и эксплуатации

Страница: 12 / 60

Introduction
1-2 Installation and User Guide
Figure 1-2 Example of an IP Encoder in a full system installation
Figure 1-2 shows an example system configuration where the IP Encoder is installed as part of a
full Intellex IP Network. In this example the IP Encoder is connected to the Intellex through a
network switch.
Features
Connections
The VideoEdge™ IP Video Encoder has the following physical connections:
• 4 Composite BNC 75 ohm connectors — for connection to analog cameras;
• 4 RJ45 Serial ports — for use with PTZ camera control, text input;
• 1 Sensornet port — for use with a Sensornet network;
• 4 Event (Alarm) inputs and 6 Event (Alarm) outputs (output alarms not supported at this
release);
• 4 Audio input/output — one for each camera (not supported at this release);
• Power jack — for use with the power supply model; and
• 1 RJ45 network connection — for connection to the 10/100 BaseT Ethernet network.