SENSORNET TO RS-422 CODE CONVERTER
8000-2593-01, REV. C
INSTALLATION GUIDE
3 of 7
Specifications
Electrical
Primary input .............. 110-120, 200-240Vac @ 50-60Hz
RS-422 Converter Input from Transformer
Primary input ...................................... 24Vac @ 50-60Hz
Power consumption ......................................... 20W max.
Allowable line drop.................................................150ms
Environmental
Operating temperature:.............0° to 50°C (32° to 122°F)
Relative humidity: .................... 0 to 90% non-condensing
Mechanical
Height ...................................................... 38.5mm (1.5in)
Width .......................................................435mm (17.1in)
Depth ........................................................ 129mm (5.1in)
Weight ......................................................1.5kg (3.3 lbs.)
Declarations
Regulatory Compliance
REG ID: RS422
EMC........................................................47 CFR, Part 15
ICES-003
EN55022
(CE)
Immunity ................................................ EN50082-1 (CE)
Safety ......................................................... UL 1950 (UL)
cUL CSA C22.2 No. 950
EN 60950 (CE)
FCC COMPLIANCE:
This equipment complies with Part 15 of the
FCC rules for intentional radiators and Class A digital devices when
installed and used in accordance with the instruction manual.
Following these rules provides reasonable protection against harmful
interference from equipment operated in a commercial area. This
equipment should not be installed in a residential area as it can radiate
radio frequency energy that could interfere with radio
communications, a situation the user would have to fix at their own
expense.
EQUIPMENT MODIFICATION CAUTION:
Equipment changes
or modifications not expressly approved by Sensormatic Electronics
Corporation, the party responsible for FCC compliance, could void the
user's authority to operate the equipment and could create a hazardous
condition.
WARNING!
North America power requirements: In North America,
this device is intended to be supplied from a Class 2 power supply.
This installation should be made by a qualified service person and
should conform to all local codes.
WARNING!
EU power requirements: This product runs on 24Vac. In
the EU, it is intended to be powered from a Limited Power Source. A
limited power source is a certified source of SELV, and if inherently
limited, with 8 amps maximum output current, and a maximum of
100VA available; or if not inherently limited, fused with a maximum
value of 3.3 Amps, meeting section 2.11 of IEC950, and a maximum
of 250VA available. The power supply can be obtained through
American Dynamics or through another source where the provider can
furnish the verification. This is required to assure electrical safety in
the product.
Stromanforderungen in der EU:
Dieses Produkt wird mit 24 V
Wechselstrom betrieben. In der EU ist es für den Betrieb durch eine
begrenzte Stromquelle vorgesehen. Eine begrenzte Stromquelle ist
eine zertifizierte SELV-Quelle (Schutzkleinspannung), bei inhärenter
Begrenzung mit einem maximalen Ausgangsstrom von 8 A und 100
VA maximaler Verfügbarkeit, bei nicht inhärenter Begrenzung mit
einer maximalen Sicherung von 3,3 A gemäß Abschnitt 2.11 der
IEC950 und 250 VA maximaler Verfügbarkeit. Das Netzteil kann über
American Dynamics oder eine andere Quelle bezogen werden, wobei
der Anbieter den Nachweis der Konformität bereitstellen sollte. Dies
ist zur Gewährleistung der elektrischen Sicherheit des Produktes
erforderlich.
Other Declarations
Thank you for using American Dynamics products. We support our
products through an extensive and worldwide network of dealers. The
dealer, through whom you originally purchased this product, is your
point of contact if you have a need for service or support. Our dealers
are fully empowered to provide the very best in customer service and
support. Dealers should contact American Dynamics at
(800) 507-6268 or (561) 912-6259 or on the web at
www.americandynamics.net.
WARRANTY DISCLAIMER:
Sensormatic Electronics Corporation
makes no representation or warranty with respect to the contents
hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose.
NOTICE:
The information in this manual was current when
published. The manufacturer reserves the right to revise and improve
its products. All specifications are therefore subject to change without
notice.
LIMITED RIGHTS NOTICE:
For units of the Department of
Defense, all documentation and manuals were developed at private
expense and no part of it was developed using Government Funds.
The restrictions governing the use and disclosure of technical data
marked with this legend are set forth in the definition of “limited
rights” in paragraph (a) (15) of the clause of DFARS 252.227.7013.
Unpublished - rights reserved under the Copyright Laws of the United
States.
TRADEMARK NOTICE:
American Dynamics
and
Sensormatic
are
trademarks or registered trademarks of Sensormatic Electronics
Corporation. Other product names mentioned herein may be
trademarks or registered trademarks of Sensormatic or other
companies.
COPYRIGHT:
Under copyright laws, the contents of this manual
may not be copied, photocopied, reproduced, translated or reduced to
any electronic medium or machine-readable form, in whole or in part,
without prior written consent of Sensormatic Electronics.
MDR 8/05
www.americandynamics.net
