Intellex RMS Digital Video Management System
5
NOTE: The Export Signal input can be used to start a Fill CD operation without
access to the normal user interface. A contact closure, e.g., an external
switch, can be used to execute the Fill CD command to export the last 500
MB of data to a CD.
14. Video Out
— This BNC connector provides a composite video signal of the live
display to an optional live monitor.
15. Camera termination switches
— The termination switches are above each
camera’s BNC connector.
CAUTION: If you set the termination switch at 75 Ohms, you MUST select “Hi-Z”
in the Intellex Setup Options screen. If you select “75 Ohms” in the
Intellex Setup Options screen, you MUST use the “infinity” symbol
setting on the termination switch.
Installation and Operation Manuals on CD
The Installation and Operation Instructions and Quick Reference Guide/Troubleshoot-
ing Guide for the RMS are on the CD included with the system. These documents are
provided in English, French, German, and Spanish languages and are in the .PDF doc-
ument format compatible with the Adobe Acrobat Reader software. A copy of the Adobe
Acrobat Reader is provided on the CD. The documents provided on the CD are intended
to be read on a standard PC and NOT the RMS. If you must install the provided copy of
the Adobe Acrobat Reader, the minimum system requirements are:
•
Intel Pentium Processor
•
CD-ROM Drive
•
Microsoft Windows 95 OSR2.0, Windows 98 SE, Windows Millennium, Windows
NT 4.0 with Service Pack 5, or Windows 2000
•
64MB RAM
•
24MB of available hard disk space
To install the Reader or access the manual information, place the CD containing the doc-
umentation in the CD drive. The installation wizard will start automatically and guide
you through the installation process. Select the language desired and follow the instruc-
tions on the screen.
If the installation wizard does not start automatically, click on
Start
,
Run
, then browse
to the drive letter of the CD drive and run
Setup.exe
.
