Intellex® RMS Installation Note
4
3. Power In
— This connector accepts any AC main power cord with an
IEC-320-C13 plug. (Most standard computer cords meet this requirement.)
CAUTION: Before connecting power, set the voltage switch to the correct
voltage (“115” or “230”).
4. Mouse
— This PS/2-style connector accepts the plug from the mouse (included
with unit) or any other PS/2-style input device.
5. Keyboard
— An optional keyboard can be plugged into this PS/2-style connector.
NOTE: Adding a keyboard to the Intellex unit will provide access to certain operating
system features such as Log Off, Shutdown, and access to other applications.
This access is not controlled or limited by the Intellex Security Option. Do not
install a keyboard if you wish to restrict user access to these operating system
features.
6. USB Connectors
— These connectors are used to add RS-232 ports, data storage
devices, and other accessories to the unit.
7. Network
— This RJ-45 connector connects the unit to a local area network. The
unit supports 10BASE-T (10Mbps) and 100BASE-TX (100Mbps) network
operation.
8. Audio Connectors
— These are 3.5mm audio jacks to connect audio
input/output.
Blue
Line In
Green
Line Out (Speakers)
Pink
Mic In (Microphone)
9. Com2
— This DB9-P connector provides the interface between the unit and a
dome controller (Sensormatic VM16 or American Dynamics ADTT16).
10. Printer
— This DB25-S connector provides the interface between the unit and the
printer.
11. VGA OUT
— This HD15-S VGA connector provides an SVGA signal to the Main
(SVGA) Monitor to display camera images and system status.
12. Camera In
— Each BNC connector inputs video. The connector accepts the
composite video output of color or B&W cameras.
13. Alarms
— These connectors accept up to 8 alarm inputs and 8 alarm outputs.
NOTE: The Time Sync Signal (Alarm In 17) is used to reset the system time of the
Intellex to the nearest hour. If the Intellex system time is up to 30 minutes
before the hour, the system time is set forward to the next hour (at zero
minutes and zero seconds). If the Intellex system time is up to 30 minutes
after the hour, the system time is set back to the previous hour (at zero
minutes and zero seconds).
