Intellex® RMS Installation Note
Eng
lish
Intellex
®
RMS
Installation Note
READ THIS BEFORE INSTALLING THE RMS!
NOTE: This note adds or corrects information in the
Intellex
RMS Installation and
Operating Instructions
. In case
of conflict, this note replaces information in those
manuals.
NOTE:
Default recording mode changed to circular.
Note
that the default Intellex 3.1 recording mode has been
changed from linear to circular. To change the
recording mode, click the Setup button, then the
Record Mode button. In the Record Mode dialog box,
select either Linear or Circular.
Connect the Mouse
You must connect the mouse cable to the upper PS/2-style con-
nector (#4 in Figure 1 below) on the rear of the unit. The lower
PS/2-style connector (#5 in Figure 1) is for a keyboard
(optional).
Connect the VGA Monitor
The monitor must be connected to the VGA connector (#11 in
Figure 1).
