INSTALLATION INSTRUCTIONS
AD32 ENHANCED T
OUCH
T
RACKER
W/VMS
8000-2671-02, REV. A
4
Reviewing System
Information
1. Press
Menu
.
2. Using the Tracker Ball, scroll down to
Show Sys Info
.
3. Press
the
zoom (top line) or focus (bottom line)
button to select the
Show Sys Info
menu
option. The LCD screen displays the following
message:
Primary/Secondary Indicator:
Primary Unit
<NEXT>
<PREV>
4. Press
Next
to step through the following
messages:
Flash and EEPROM checksum values:
ROM Checksum
E=0A7B
F=9C82
Flash
Checksum
EEPROM
Checksum
Tracker Ball calibration values:
Min
00 00 00 00
Max
00 00 00 00
Flash and EEPROM part numbers (including
version):
Flash Part Number
and Version
Product Code
F 0701-0000-0000
Product Code
E 0701-0000-0000
EEPROM Part Number
and Version
5. Press
Menu
to exit.
Performing SensorNet Ping
Test
1. Use the number buttons to select a dome to
test, then press
(the
Camera
button).
2. Press
Menu
.
3. Using the Tracker Ball, scroll down to
Ping Dome/TTR
.
4. Press
the
zoom (top line) or focus (bottom line)
button to select the
Ping Dome/TTR
menu
option and to start the ping test on the
selected dome. The LCD screen displays the
following message:
*
=Device being
tested
No. of pings
transmitted
*Dome
Tx=0006
TTR
Bad=0002
No. of failed
responses
5. Press Next to perform the ping test on the
Secondary T
OUCH
T
RACKER
controller unit.
6. Press
Menu
to exit.
Off-line domes or fixed cameras will generate a
warning beep and disallow use of the SensorNet
network test.
Changing the Port Setting
1. Press
Menu.
2. Using the Tracker Ball, scroll down to
Port Settings.
3. Press
the
zoom (top line) or focus (bottom line)
button to select the Port Settings menu option.
The LCD screen displays the following
message:
*Operating Mode
Download Mode
*
=Selected mode
4. Press Next to change the currently selected
mode.
5. Press
Menu
to save the change and exit.
