American Dynamics AD32E, Руководство оператора

Страница: 31 / 118

2-10 Operator's Manual
You can define the Sequence that most adequately supports your specific
needs. Refer to Chapter 3, “
Defining Automatic System Functions ,” for
procedures on defining the Sequence.
To run the Sequence, press the Seq button. The Sequence automatically
begins running and the information shown here appears on the LCD.
CAM 32
MON 4 SEQ 12 22
Figure 2-3: Sequence display overview.
As the Sequence is running, the LCD indicates which camera's video appears
on the monitor, which event in the Sequence is active, and the seconds
remaining in that event's duration time.
The Sequence will repeat itself indefinitely until you press either the
Seq
or
Clear button, or move the Tracker Ball on the T
OUCH
T
RACKER
.
Controlling Output Devices
Outputs devices are external devices, such as lights, audible alarms, door
locks, that can be controlled via the T
OUCH
T
RACKER
. Output devices may
be connected to outputs on the domes or the video matrix switcher. Each
dome can have up to four output devices connected to it. The back panel of
the video matrix switcher provides connection for one additional output
This is the camera whose
Quick View, Pattern, or fixed
shot currently appears on the
monitor.
This is the event number
assigned to this Quick View,
Pattern, or fixed shot in the
Sequence.
This indicates how many
seconds are remaining until
the monitor switches to the
next event in the Sequence.
This is the monitor where
the events of the sequence
are being displayed.