36
1) To effectively use this information or the flowcharts (on
page 37
,
page 38
, and
page 39
), each
step
must be
completed in sequence, performing whatever tests are suggested. After the completion
of each test, the guide will direct the service technician to the next logical step in the troubleshooting
sequence based on the outcome of the previous check.
2) Components
should be
replaced only after each step has been completed and replacement is
suggested in the flowchart. However, the experienced technician realizes that a loose connection
or broken or shorted wire may be at fault where electrical components are concerned, and not
necessarily the suspected component itself.
c. Three (3) Visual Checks...
1) No spark and system does not work. If not, proceed to
First Visual Check
on
page 37
.
2) Spark present but main burner does not come on. If not, proceed to
Second Visual Check
on
page 38
.
3) Main burner lights but does not stay on. If not, proceed to
Third Visual Check
on
page 39
.
Содержание AD-540
Страница 64: ...60 ...
Страница 65: ...ADC450246 1 09 08 03 0 ...
