American Dryer Corp. AD-200 Tilting, Инструкция по эксплуатации и запасным частям

Страница: 57 / 76

53
Telephone: (508) 678-9010 Fax: (508) 678-9447
Illus. No. Part No. Qty. Description
1 141302 1 1” Shut-Off Valve
2 142711 1 1” Close Nipple
3 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
4 332605 1 Short Pipe Bracket
5 142602 1 1” Union
6 142584 1 1” x 4-1/2” Nipple
7 142548 1 1” x 90° Elbow
8 142711 1 1” Close Nipple
9 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
10 332604 1 Long Pipe Bracket
11 140017 1 1” x 1” 24 VAC Gas Valve
140018 1 1” 24 VAC Gas Valve L.P. Conversion Kit
12 142711 1 1” Close Nipple
13 142548 1 1” x 90° Elbow
14 141244 1 5-Port Manifold
15* 140840 5 #1 Burner Orifice
(for Natural Gas models mfd. as of March 2, 1992)
140839 5 #2 Burner Orifice
(for Natural Gas models mfd. prior to March 2, 1992)
140821 5 #28 Burner Orifice
(for L.P. Gas models mfd. as of March 2, 1992)
140820 5 #29 Burner Orifice
(for L.P. Gas models mfd. prior to March 2, 1992)
16 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
17 332606 1 Manifold Rest
18 141110 5 Burner Tube
19 150301 10 #8-18 x 7/16” Phillips Pan Head TEK Screw
20 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
21 332607 1 Burner Tube Rest
22 150301 5 #8-18 x 7/16” Phillips Pan Head TEK Screw
23 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw
24 331290 1 Sight Hole Disc
25 332597 1 Burner Box Cover Plate
26 --------- 1 Sail Switch (refer to Sail Switch Assembly on page 55 )
27 150415 2 #10-16 x 1/2” Phillips Round Head Crimptite Screw
28 880943 1 Ignitor/Flame Probe Assembly Kit
880330 1 DSI Ignitor HV (High Voltage) Wire/Connector ONLY
305410 1 DSI (Direct Spark Ignition) Gap Feeler Gauge
29 150001 2 #6-32 x 1/2” Round Head Machine Screw
30 130401 1 330° High Limit ONLY
31 151000 2 #6-32 Pal Nut
32** 880789 1 ADG-200 Burner Box ONLY
880790 1 ADG-200 Natural Gas Burner Box Assembly Complete less Orifices
(includes illus. nos. 1 through 14 and 16 through 32)
880791 1 ADG-200 L.P. Gas Burner Box Assembly Complete less Orifices
(includes illus. nos. 1 through 14 and 16 through 34)
--- 880754* 1 ADG-200 DSI L.P. Conversion Kit
33*** 332622 1 ADG-200 Burner (Left Side) Baffle/Cover
34*** 150309 6 #10-16 x 1/2” Hex Head TEK Crimptite Screw
* Contact factory for elevations over 2,000 feet.
** Orifices are not included and must be ordered separately.
*** For use on models with L.P. Gas ONLY.
ADG-200 Gas Burner Assembly