American DJ X-Move LED 25R, Инструкция пользователя

Страница: 6 / 12

American DJ
®
- www.americandj.com - X-Move LED 25R Instruction Manual Page 11
American DJ
®
- www.americandj.com - X-Move LED 25R Instruction Manual Page 12
it will be set up, you can turn the lens to adjust the clarity. Press
MENU to exit.
TEST
- This function will run a self test program. The test
program will test pan/tilt movement and colors.
1. Tap the MENU button until “ TEST ” is displayed, press ENTER.
2. The fixture will now run a self test.
TEMP
- With this function you can check the temperature
of the fixture.
1. Tap the MENU button until “ TEMP ” is displayed, press ENTER.
2. The temperature of the fixture will now be displayed. Press
MENU to exit.
FHRS
- With this function you can display the running time
of the unit.
1. Tap the MENU button until “ FHRS ” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
- With this function you can display the version soft-
ware of the unit.
1. Tap the MENU button until “ VER ” is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to
exit
RSET
- Use this function to reset the unit.
1. Tap the MENU button until “ RSET ” is displayed, press ENTER.
2. The fixture will now reset,
X-Move LED 25R System Menu
2. To activate the Pan inversion tap the UP or DOWN buttons
until I is displayed, press ENTER to confim. To deactivate Pan
inversion, select No and press Enter.
I TLT -
Tilt Inversion
1. Tap the MENU button until “ I TLT ” is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Tilt inversion tap the UP or DOWN buttons
until I is displayed, press ENTER to confim. To deactivate Tilt
inversion, select No and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “ LED ” is displayed, press ENTER.
2. The display will show either “ ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to keep the LED display on at
all times, or “ OFF ” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm. To make you LED display reappear
again press any button.
DISP -
This function will reverse the display 180º.
1. Tap the MENU button until “ DISP ” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it
again. Press ENTER when you have made your desired setup.
FADJ
- This function will allow you to focus the lens for a
clear LED output.
1. Tap the MENU button until “ FADJ ” is displayed, press
ENTER. The fixture will turn a different way each time the
ENTER button is pressed.
2. With the spot pointed at a flat wall or surface, at the distance
X-Move LED 25R System Menu