Vizi Scan LED PRO
Gobo Replacement
This unit comes with interchangable gobos. Changing the
gobos is a easy procedure. Follow the instructions below.
Caution!
Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. To change the gobo, you must remove the top half of the
units body. The top half of the body has the LCD display on it
2. Unscrew the four phillips screws on the front of the body.
Remove the top half shell of the body.
3. When you remove the shell you will be able to access the
gobo wheel. Turn the wheel with your hand until you come
across the gobo you would like to change.
4. You have to remove the individual gobo set-up. Gently push
the gobo frame (Not the wheel) away from the gobo wheel,
you do not have to push gobo frame to far. While you are
pushing the gobo frame away from the wheel, pull the gobo
frame up and out. This process is simplified using a small
flathead screwdriver.
5. Once the gobo frame has been removed, remove the fixture-
ring and gobo. The fixture ring can be removed by using a
small flathead screwdriver. The fixture ring should easily
come out of the frame. After the fixture ring is removed, re
move the gobo.
6. Change the gobo, replace the fixture ring. When inserting
the gobo frame back into the unit, the bottom of the gobo
frame must slide underneath the metal place holder located
at the bottom of the gobo wheel.
7. Reassemble the unit.
Vizi Scan LED PRO Fuse Replacement
Caution:
Always replace with the exact same type of fuse, unless
otherwise specified by an authorized American DJ
®
service techni-
cian. Replacing with anything other than the specified part can dam-
age your unit and will void your manufactures warranty.
Warning:
If you continue to blow fuses, STOP using the unit.
Contact customer support for further instructions, you may have to
return the unit for servicing. Continuing to use the unit may cause
serious damage.
Fuse Replacement: First unplug the power. The fuse holder is located
next to the power cord. Using a flat-head screw driver unscrew the
fuse holder. Remove the bad fuse and replace with a new one. se.
Vizi Scan LED PRO
12 Channel Mode
Channel Value
Function
12 RESET & INTERNAL PROGRAMS
88 - 90 COLOR MOTOR RESET
91 - 93 GOBO MOTOR RESET
94 - 96 NO FUNCTION
97 - 99 OTHER MOTOR RESET
100 - 119 INTERNAL PROGRAM 1
120 - 139 INTERNAL PROGRAM 2
140 - 159 INTERNAL PROGRAM 3
160 - 179 INTERNAL PROGRAM 4
180 - 199 INTERNAL PROGRAM 5
200 - 219 INTERNAL PROGRAM 6
220 - 239 INTERNAL PROGRAM 7
240 - 255 SOUND ACTIVE PROGRAM
American DJ
®
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 47
American DJ
®
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 48
