UV Canon™
Lamp and Fuse Replacement
©
American DJ
®
- www.americandj.com - UV Canon™ Instruction Manual Page 6
©
American DJ
®
- www.americandj.com - UV Canon™ Instruction Manual Page 5
ONE YEAR LIMITED WARRANTY
A. American DJ
®
hereby warrants, to the original purchaser, American DJ
®
products to be
free of manufacturing defects in material and workmanship for a period of one year (365
days) from the date of purchase. This warranty shall be valid only if the product is pur-
chased within the United States of America, including possessions and territories. It is the
owner’s responsibility to establish the date and place of purchase by acceptable evidence,
at the time service is sought.
B. For warranty service, send the product only to the American DJ
®
factory. All shipping
charges must be pre-paid. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, American DJ
®
will pay return shipping charges only
to a designated point within the United States. If the entire instrument is sent, it must be
shipped in its original package. No accessories should be shipped with the product. If any
accessories are shipped with the product, American DJ
®
shall have no liability whatsoever
for loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is
modifi ed in any manner which American DJ
®
concludes, after inspection, affects the reli-
ability of the product; if the product has been repaired or serviced by anyone other than
the American DJ
®
factory unless prior written authorization was issued to purchaser by
American DJ
®
; if the product is damaged because not properly maintained as set forth in
the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning
or periodic check-up. During the period specifi ed above, American DJ
®
will replace defec-
tive parts at its expense, and will absorb all expenses for warranty service and repair labor
by reason of defects in material or workmanship. The sole responsibility of American DJ
®
under this warranty shall be limited to the repair of the product, or replacement thereof,
including parts, at the sole discretion of American DJ
®
. All products covered by this war-
ranty were manufactured after January 1, 1990, and bear identifying marks to that effect.
E. American DJ
®
reserves the right to make changes in design and/or improvements upon
its products without any obligation to include these changes in any products theretofore
manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any acces-
sory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by American DJ
®
in connection with this product, includ-
ing warranties of merchantability or fi tness, are limited in duration to the warranty period
set forth above. And no warranties, whether expressed or implied, including warranties of
merchantability or fi tness, shall apply to this product after said period has expired. The
consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall American DJ
®
be liable for any loss or
damage, direct or consequential, arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to American DJ
®
Products and
supersedes all prior warranties and written descriptions of warranty terms and conditions
heretofore published.
H. Lamps are not covered under this or any other warranty either written or implied.
UV Canon™
Warranty
Caution:
Always replace with the exact same type lamp and fuse,
unless otherwise specified by an authorized American DJ
®
techni-
cian. Replace with anything other than the specified part can damage
your unit and will void your manufactures warranty.
Warning:
If you continue to blow either the lamp or fuse after either
one has already been replaced, STOP using the unit. Contact cus-
tomer support for further instructions, you may have to return the unit
for servicing. Continuing to use the unit may cause serious damage.
Fuse Replacement:
The fuse is located on the rear of the unit next
to the power cord. Occasionally this fuse may blow when the unit
becomes to hot. To replace the fuse; disconnect the unit from the main
power supply and unscrew the fuse holder from the fuse holder hous-
ing. Remove the old fuse and discard it, replace the fuse with an exact
same type. Insert the new fuse into it’s holder and return the holder to
the fuse housing.
Lamp Replacement:
Caution! Never open the unit when in use.
Always disconnect the main power and allow the fixture ample time
to cool before attempting to replace the lamp. Lamp replacement has
been made simple by incorporating a remove tray that is retained by
a single thumb screws. Again, please remember to always replace
with the exact same type lamp.
1. Be sure to follow the proper procedures when handling halogen
lamps. Never touch the new lamp with your bare fingers.
2. Located the two Phillips screws that secure the front lamp protec-
tion grill to the unit chassis. Remove these screws with a #2 Phillips
screwdriver to access the lamp socket.
3. Once the screws have been removed, remove the grill to expose
the lamp.
4. Remove and replace the lamp with an exact match.
5. Reassemble in reverse order.
UV Canon™
Safety Hook
The UV Canon has a built-in safety hook on the rear of the unit
located near the power cord. This hook allows a safety cable to be
securely fastened to the unit when mounting or suspending the unit
from the yoke. Always use this hook in combination with a safety
cable for safe and secure mounting.
