©
American DJ
®
- www.americandj.com - Tri Fecta™ Instruction Manual Page 8
©
American DJ
®
- www.americandj.com - Tri Fecta™ Instruction Manual Page 7
Tri Fecta™
Laser Warninig Labels
Tri Fecta™
Control & Functions
1. XLR Input Jack -
This jack is used to accept an incoming DMX
signal or Master/Slave signal.
2. Breaker -
A 3A built-in safety breaker to reduce the risk of electri-
cal shock or fire and protect the circuitry. In the case of a internal short
or power surge.
3. Power Cord -
Connect only to a matching power outlet. Never
use this fixture is the ground prong has been removed or broken off.
4. Microphone -
This microphone receives external low frequencies
to trigger the unit in Sound-Active mode. This microphone is designed
to receive low frequency sounds only, tapping on the microphone and
high pitch sounds may not trigger the unit.
5. Mini/C Controller Jack -
This jack is for use with the optional
Mini/C controller only. Do not attempt to connect an audio signal to
3 A M P
DMX IN
DMX IN
MINI/C
REMOTE
ONLY
MIC
SENSITIVITY
KNOB
1
8
7
6
5
4
3
2
