ADJ Products, LLC - www.adj.com - Quad Phase Go Instruction Manual Page 10
ADJ Products, LLC - www.adj.com - Quad Phase Go Instruction Manual Page 9
5-Pin XLR DMX Connectors.
Some manufactures use 5-pin XLR
connectors for DATA transmission in place of 3-pin. 5-pin XLR fixtures
may be implemented in a 3-pin XLR DMX line. When inserting stan-
dard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be
used, these adaptors are readily available at most electric stores. The
chart below details a proper cable conversion.
Conductor
5-Pin XLR Male (In)
3-Pin XLR Female (Out)
Pin 1
Pin 5 - Do Not Use
Pin 4 - Do Not Use
Pin 3
Pin 2
Pin 1
Pin 3
Pin 2
Not Used
Not Used
Data True (+ signal)
Data Compliment (- signal)
Ground/Shield
3-Pin XLR to 5-Pin XLR Conversion
Quad Phase Go
Set Up
Quad Phase Go
System Menu
DMX 512 address setting
Master mode
Slave mode 1
Slave mode 2
Sound mode on
Sound mode off
Sound sense 0-100
LED on
DMX state
LED off
Normal
Inversion
Software version
MENU
Battery state
Fixture hours