©
American DJ Supply
®
- www.americandj.com - P64 LED Plus Instruction Manual Page 10
©
American DJ Supply
®
- www.americandj.com - P64 LED Plus Instruction Manual Page 9
f
unction also allows you to use your fixtures as spot lights.
To help set
up DMX Control refer to the set-up specifications that come with your
DMX controller as well.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller such as the
Elation
®
Show Designer™ or the Elation
®
DMX Operator.™
2. The P64 LED Plus uses six DMX channels to operate see page 10
for the DMX traits.
3. Follow the set-up procedures on pages 5-7 as well as the set-up
specifications that are included with your DMX controller.
3. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller. Set your desired
DMX address following the dipswitch cart on page 12.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Master or as a Slave however, only
one unit can be programmed to act as the “Master.”
Master-Slave Connections and Settings:
1
. Daisy chain your units via the XLR connector on the rear of
the unit. Use standard XLR microphone cables to link your
units together. Remember that the Male XLR connector is the
input and the Female XLR connector is the output. The first
unit in the chain (master) will use the female XLR connector
only. The last unit in the chain will use the male XLR
connector only.
2. Using the Master unit, choose your desired mode of operation
and connect the “Slave” unit or units.
3. Set all the dipswitces on the “Slave” unit(s) to the “Off” position.
The “Slave” unit(s) will now follow the “Master” unit.
P64 LED Plus Operating Instructions
P64 LED Plus DMX Values and Functions
Channel Value
Function
1 0 - 255 RED
0% 100%
2 0 - 255 GREEN
0% 100%
3 0 - 255 BLUE
0% 100%
4 8 - 255 COLOR MACRO
5 0 - 15 NOTHING
16 - 255 STROBING
6 0 - 31 NOTHING
DIMMING CONTROL
32 - 63 DIM BRIGHT
64 - 95 BRIGHT DIM
96 - 127 DIM BRIGHT DIM
128 - 159 COLOR MIXING
160 - 191 3 COLOR CHANGE
192 - 223 7 COLOR CHANGE
224 - 255 SOUND ACTIVE
Channel 1, 2, and 3 will not work, when Channel 4 is being
used. When units are daisy chained together in DMX Mode,
channels 1, 2, and 3 must be
“OFF”
for units to sync together
when using Channel 4.
When the value of Channel 6 is between 32 and 127, you must
be using Channels 1, 2, 3, or all three combined.
When using Channel 6, Channel 5 will control the speed of the
color changing.
