©
American DJ
®
- www.americandj.com - Mine II™ Instruction Manual Page 4
©
American DJ
®
- www.americandj.com - Mine II™ Instruction Manual Page 3
Mine II™
Precautions
Safety Issues:
This unit may blow a fuse if the maximum allotted load
of 10 amps (5 amps for 220v version) is reached. If the fuse needs
replacement please refer to the fuse replacement instructions on page
5.
• To reduce the risk of electrical shock or fi re, do not expose this
unit rain or moisture
• Do not spill water or other liquids into or on to your unit
• Do not attempt to operate this unit if the power cord has been
frayed or broken
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fi re in case of an internal short
• This unit is intended for internal use only, use of this product out-
doors voids all warranties written or implied.
• Two Moving Heads
• Easy Lamp Replacement
• Compact High-Tech Case Design
• Built-In Hanging Base
• Light Weight Case Design
• Multi-Colored Beams
• 54 Multi-Colored Lenses
• 2 x ZB-64514 120v/300w Lamps or 2 x ZB-64516 220v/300w
Mine II™
Features
Mine II™
Warranty Registration
The Mine II™ carries a one year (365 days) limited warranty. Please fill
out the enclosed warranty card to validate your purchase. All returned
service items whether under warranty or not, must be freight pre-paid
and accompany a return authorization (R.A.) number. The R.A. num-
ber must be clearly written on the outside of the return package. A
brief description of the problem as well as the R.A. number must also
be written down on a piece of paper included in the shipping carton.
If the unit is under warranty, you must provide a copy of your proof of
purchase invoice. You may obtain a R.A. number by contacting our
customer support team on our toll free customer support number. All
packages returned to the service department not displaying a R.A.
number on the outside of the package will be returned to the shipper.
Mine II™
Operation
Power Supply:
Before plugging your unit in, be sure the source
voltage in your area matches the required voltage for your American
DJ
®
Mine II™ before attempting operation.
General Operation:
Just plug this light in, and watch it go. This fix-
ture is designed to operate as a stand alone unit. It has been tested
and the lamp has been installed at the factory there is no assembly
necessary. The Mine II™ is ready to be plugged in, out of the box.
There is no power switch, after plugging the unit in the base and two
outer heads will immediately begin to spin.
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
Mine II™
General Instructions
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the
internal and external lenses should be carried out periodically to opti-
mize light output. Cleaning frequency depends on the environment
in which the fixture operates (I.e. smoke, fog residue, dust, dew).
In heavy use we recommend cleaning on a monthly basis. Periodic
cleaning will ensure longevity, and crisp beam output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a soft brush to clean out the air vents
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Mine II™
Cleaning
