American DJ Fantasy Scan 250 Скачать руководство пользователя страница 2

Unpacking: 

Thank  you  for  purchasing  the  Fantasy  Scan  250™  by 

American DJ

®

. Every Fantasy Scan 250™ has been thoroughly tested 

and has been shipped in perfect operating condition. Carefully check 
the shipping carton for damage that may have occurred during ship-
ping. If the carton appears to be damaged, carefully inspect your fix-
ture for any damage and be sure all equipment necessary to operate 
the unit has arrived intact. In the event damage has been found or parts 
are missing, please contact our toll free customer support number for 
further instructions. Please do not return this unit to your dealer with-
out contacting customer support first. 

Introduction: 

The  Fantasy  Scan  250™  is  a  eight  channel,  moving 

head,  intelligent DMX fixture. The fixture can operate in three differ-
ent operating modes; stand alone, sound-active, or in a Master/Slave 
configuration. The Fantasy Scan 250™ comes with several built in pro-
grams  and  is  best  used  in  multiples  of  four.  When  used  as  a  stand 
alone unit or when used in multiples linked in a master/slave configura-
tion. 

For best results use fog or special effects smoke to enhance the 

beams projections. 

During the initial start-up or use of this product a light smoke or 
smell  may  arise  from  the  unit.  This  is  a  normal  process  and  is 
cause by the heat associated with the lamp.

 

Customer  Support:

  American  DJ

®

  provides  a  toll  free  customer 

support line, to provide help and to answer any question should you 
encounter problems during your set up or initial operation. You may 
also visit us on the web at www.americandj.com for any comments or 
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:
00 p.m. Pacific Standard Time.
 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2610

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Warning! 

This may cause severe eye damage. Avoid looking directly 

into the light source at all times!

  Fantasy Scan 250™  

      

                  General Information

For Your Own Personal Safety, Please Read and Understand This 

Manual Completely Before You Attempt To Install Or Operate 

This Unit!

•   To reduce the risk of electrical shock or fire, do not expose this unit  
   rain or moisture
•   Do not spill water or other liquids into or on to your unit.
•   Be sure that the local power outlet match that of the required volt-
   age for your unit.
•   Do not attempt to operate this unit if the power cord has been 
   frayed or broken. 
•   Do not attempt to remove or break off the ground prong from    
   the electrical cord. This prong is used to reduce the risk of electrical  
   shock and fire in case of an internal short.
•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no user  
   serviceable parts inside.
•   Never operate this unit when it’s cover is removed.
•   Always be sure to mount this unit in an area that will allow proper  
   ventilation. Allow about 6” (15cm) between this device and a wall.
•   Do not attempt to operate this unit, if it becomes damaged.
•   This unit is intended for indoor use only, use of this product out-
   doors voids all warranties.
•   Always mount this unit in safe and stable matter.
•   Power-supply cords should be routed so that they are not likely to  
   be walked on or pinched by items placed upon or against them,  
   paying particular attention to cords at plugs, convenience recep- 
   tacles, and the point where they exit from the appliance. 
• Cleaning -The fixture should be cleaned only as recommended by  
   the manufacturer. See page 38 for cleaning details.
•   Heat -This fixture should be situated away from heat sources such 
   as radiators, heat registers, stoves, or other appliances (including 
   amplifiers) that produce heat.
•   The fixture should  be serviced by qualified service personnel when:
    A. Objects have fallen, or liquid has been spilled into the appliance.
    B. The appliance has been exposed to rain or water.
    C. The appliance does not appear to operate normally or exhibits a  
     

  

 marked change in performance.

 Fantasy Scan 250™  

 

              Safety Precautions

American DJ

®

  -  www.americandj.com  - Fantasy Scan 250™ Instruction Manual Page 4

American DJ

®

  -  www.americandj.com  - Fantasy Scan 250™ Instruction Manual Page 3

Содержание Fantasy Scan 250





















Отзывы: