Fantasy Scan 250™
Editing Program
American DJ
®
- www.americandj.com - Fantasy Scan 250™ Instruction Manual Page 30
American DJ
®
- www.americandj.com - Fantasy Scan 250™ Instruction Manual Page 29
editing, the display will change to the next scene automatically.
13. Repeat steps 3-12 to edit other scenes, you can edit and
save 48 scenes maximum.
14. Press MODE/ESC to exit, now you have edited and saved
scenes using the control board. The number of steps can be
defined under “EDIT” and the scenes can be called up under
“Run”. To run the scenes see page 26.
Editing procedure 2: Using an external controller (Manually
record scenes one by one):
1. Access the main menu.
2. Select “
EDIT
” by pressing the UP or DOWN buttons, press
ENTER.
3. The display shows “
SC01
”.
4. Press ENTER, and the display shows “
C-01
”.
5. Select “
CEDT
” by pressing the DOWN button, and press
ENTER.
6. The display “
OFF
”, press the UP button so that “
ON
” is dis-
played, and press ENTER.
7. The display will show “
SCO2
”. You have now successfully
downloaded the first scene.
8. Adjust the Step-time needed by pressing the UP button.
9. Call up the second scene in your controller now.
10. Repeat steps 7-9 until all desired scenes are downloaded.
11. Press MODE/ESC to exit. The number of steps can be
defined under “Step” and the scenes can be called up under
“Run”.
Fantasy Scan 250™
Editing Program
Editing procedure 3:
Record the selected scenes automati-
cally from external controller:
1. Access the main menu.
2. Select “
EDIT
” by pressing the UP or DOWN buttons, press
ENTER.
3. Press the UP button until the display shows “
STEP
”, press
ENTER.
4. Now adjust and set the number of steps by pressing the
UP or DOWN buttons. Press ENTER to confirm the number of
steps, and “
PASS
” will display briefly.
5. Now press the DOWN button until “
REC
” is displayed, and
press ENTER.
6. The display will now show “
RE.XX
”, “
XX
” stands for the scene
number in the internal memory which the scenes from the con-
troller will be stored to. Press ENTER when you have chosen
the scene number.
7. Call up the scenes on the controller, and the fixture will
record the scenes from the controller automatically. After the
number of scenes as selected in the “
STEP
” menu are loded into
the fixture, it will stop the procedure and return to the previous
menu.
8. Press MODE/ESC to exit the “
EDIT
” menu and return to the
main menu.
