©
American DJ
®
- www.americandj.com - Emerald Sky™ Instruction Manual Page 15
©
American DJ
®
- www.americandj.com - Emerald Sky™ Instruction Manual Page 16
Emerald Sky™
Operation
Emerald Sky™
DMX Traits and Patterns
Channel
Value
Function
1 LINE SELECTION
0 OFF
1 - 52 LINE
53 - 104 DOTTED LINE 1
105 - 156 DOTTED LINE 2
157 - 207 DOTTED LINE 3
208 - 225 LINES CHANGE EVERY 3 SECONDS
226 - 255 LINES CHANGE EVERY 5 SECONDS
2 LASER PATTERN SELECTION
LEFT LASER RIGHT LASER
0 - 1 STOP
2 - 15 FAST FAST
16 - 29 MODERATE FAST
30 - 43 MODERATE MODERATE
44 - 57 FAST MODERATE
58 - 71 FAST FAST
72 - 85 MODERATE FAST
86 - 99 MODERATE MODERATE
100 - 113 FAST MODERATE
114 - 127 FAST FAST
128 - 141 MODERATE FAST
142 - 155 MODERATE MODERATE
156 - 169 FAST MODERATE
170 - 183 FAST FAST
184 - 197 MODERATE FAST
198 - 211 MODERATE MODERATE
212 - 225 FAST MODERATE
226 - 255 SOUND ACTIVE MODE
dipswitches 10 & 11 to the “ON” position. This unit must be the
first unit in line.
3. Turn dipswitch #1 to the “ON” position on the SLAVE units,
and they will react the same as the MASTER.
4.
Sound Active Mode:
Choose a unit to function as the Master and
set dipswitch #11 to the “ON” position. This unit must be the first
unit in line.
5. Turn dipswitch #1 to the “ON” position on the SLAVE units,
and they will react the same as the MASTER.
6. Use the sensitivity knob on the back of the master unit to make
it more or less sensative to sound.
Emerald Sky™
Cleaning
Due to fog residue, smoke, and dust, cleaning the internal lenses
should be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Always be sure to dry all parts completely before plugging the
unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-
mend cleaning on a monthly basis. Periodic cleaning will ensure lon-
gevity, and crisp beam output.
Emerald Sky™
Fuse Replacement
Locate and remove the unit’s power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry
out the fuse holder. Remove the bad fuse and replace with a new one.
The fuse holder has a built-in socket for a spare fuse be sure not to
confuse the spare fuse with active fuse.
