7. Cueing
•
”Cueing” is the action of preparing for playback; when the Cue button is pressed, playback returns to
the cue point and enters pause mode. When the PLAY/PAUSE button is pressed during the cue mode,
playback starts.
•
Cue point setting:
A
Playback starts from pause or skip to a new track during play or pause. The beginning play point will
be set to the cue point.
Or
B
Press the REALTIME CUE button during playback to set the new cue point.
Or
C
Memorize any of 10 CUE points by pressing MEMORY then set desired Cue then press any of 10
number buttons. you can also set any of the 10 Cue points by pressing MEMORY then any of the
NUMBER Buttons.
To return to Cue point press Cue Button. This will return to point A or B above.
The player has completed the cue or pause operation and is waiting for the play start command.
When the PLAY/PAUSE button is pressed, playback starts.
To Return to any of the 10 Cue points press RECALL then desired number buttons
The player has completed the cue or pause operation and is waiting for the play start command.
When the PLAY/PAUSE button is pressed, playback starts.
NOTE: When play starts via pause or track skipping or scanning, the cue point will change to the start
point automatically.
8. Auto cue
When disk is loaded, the cue point is set to the first source of music.
If track is changed before pressing play , the cue point is changed to the new starting point.
If you pause during playback this also sets the new cue point.
9. Frame search
This is done by first pausing then using the jog wheel to set the starting point. (When you use the jog
wheel the monitor function allows you to here what is playing. Once you have set starting point press
PLAY then CUE to again mute output.)
10. Scanning (fast forward / Fast reverse)
To do this rotate Shuttle wheel forward or reverse
You will scan or reverse at 4 different speeds depending on how much you rotate the wheel.
6. Pausing
•
Press the PLAY/PAUSE button to switch between play and pause.
•
The PAUSE indicator lights when the pause mode is set.
1) The player has completed the cue or pause operation and is waiting for the play start command.
2) When the PLAY/PAUSE button is pressed, playback starts and the cue point is stored in the memory.
3) Playing
4) The pause mode is set when the PLAY/PAUSE button is pressed again.
5) Pausing
6) Playback resumes when the PLAY/PAUSE button is pressed again. The new cue point is stored
in the memory.
7) Playing
American DJ
®
AUDIO • DCD-PRO300™ INSTRUCTIONS MANUAL • PAGE 9
5. Stopping Playback
•
There are two ways to stop playback.
1) Press the PLAY/PAUSE button during playback to pause at that point.
2) Press the CUE button during playback to return to the position at which playback started.(Back Cue)