American DJ
®
- www.americandj.com - Accu Spot 575 Instruction Manual Page 47
American DJ
®
- www.americandj.com - Accu Spot 575 Instruction Manual Page 48
Accu Spot 575
Gobo Replacement
This unit comes with interchangable gobos for both gobo
wheels. Changing the gobos is a easy procedure. Follow the
instructions below.
Caution!
Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. Remove the correspoding half of the head where the gobo
wheel is located.
The wheel with static gobos is located
on the top half of the moving head, and the wheel with
the rotating gobos is located on the bottom half of the
moving head.
2. Each half of the head has four spring loaded phillips screws
that secure it. Unscrew the four phillips screws and remove
the half of the head shell.
3. When you remove the shell you will be able to access the
gobo wheel. Turn the wheel with your hand until you come
across the gobo you would like to change.
4. With your finger push the gobo out towards the front and
then slide the gobo up and out of the wheel. When doing this
you do not need a lot of pressure.
5. Change the gobo by sliding the new gobo into place and
reassemble the shell.
Note: If you want to add your own custom gobo, you will
have to remove the retainer ring that secures the gobo to
the gobo frame. Remove the retainer ring using your finger
nail or flat head screwdriver. Secure your gobo to the gobo
frame using the retainer ring and slide the new gobo into
place in the wheel.
Channel Value
Function
16 LAMP ON/OFF, RESET,
INTERNAL PROGRAMS
60 - 79 LAMP OFF
80 - 84 ALL MOTOR RESET
85 - 87 SCAN MOTOR RESET
88 - 90 COLOR WHEEL MOTOR RESET
91 - 93 GOBO WHEEL MOTOR RESET
94 - 96 SHUTTER/DIMMER MOTOR RESET
97 - 99 OTHER MOTOR RESET
100 - 119 INTERNAL PROGRAM 1
120 - 139 INTERNAL PROGRAM 2
140 - 159 INTERNAL PROGRAM 3
160 - 179 INTERNAL PROGRAM 4
180 - 199 INTERNAL PROGRAM 5
200 - 219 INTERNAL PROGRAM 6
220 - 239 INTERNAL PROGRAM 7
240 - 255 SOUND ACTIVE
Accu Spot 575
DMX Traits cont.
