American Audio VELOCITY MP3 Скачать руководство пользователя | Manualshive

Страница: 32 / 43

background image

©

American Audio

®

- www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 32

Figure 54

FLANGER/ECHO/ROBOT EFFECT:

The flanger effect alters

the output signal and create an effect similar to the frequencies
phasing in and out of each other. The echo effect adds an echo
to your output signal. The robot effect alters the output to simu-
lates a sci-fi robot voice. When the flanger effect is selected the

FLANGER/ECHO BUTTON (8)

will glow yellow, when the echo

or robot effect is selected the

FLANGER/ECHO BUTTON (8)

will

glow red.

ROBOT EFFECT:

The ROBOT effect alters the output to

simulates a sci-fi robot voice. The ROBOT effect is activated in
the echo parameters (see "Parameters" in the next section). To
activate the robot effect select the echo effect (

FLANGER/ECHO

BUTTON (8)

will glow yellow). After the Echo effect is activated

turn the

HOLD (19)

function on. Use the

PARAMETER TIME

KNOB (13)

and set the (PT) value to 0010. After "PT" value has

been set, use the

PARAMETER RATIO KNOB (14)

to create the

effect by turning it back and forth.

BUILT-IN EFFECTS

FILTER/PHASE EFFECT:

The Filter and Phase effects tweak

the original sound to add different tonal definition. When the Filter
Effect is activated the

FILTER/PHASE BUTTON (7)

will glow yellow,

when the Phase Effect is selected the button will glow red. The
reaction these effects have to the original tonal definition can be
altered by changing the

PARAMETER TIME (13)

and

PARAMETER

RATIO (14)

.

Figure 53

FLANGER EFFECT:

The flanger effect alters the output signal and creates an effect similar to frequencies

phasing in and out of each other. The FLANGER Effect has two adjustable parameters, Parameter Time (PT)
and Parameter Ratio (PR). The PT will adjust the Flanger Mode and The PR will adjust the Flanger Frequency
Range (see "Parameters" in the next section).

ECHO EFFECT:

The ECHO effect adds an echo to your output signal. The ECHO Effect has two adjustable

parameters, Parameter Time (PT) and Parameter Ratio (PR). The PR will adjust the length of the echo (drop off
time), and the PT will adjust the echo gap length (see "Parameters" in the next section).
off time), and the PT will adjust the echo gap length.

Figure 52

SCRATCH/SKID EFFECT:

The Scratch Effect simulates real

time turntable scratching. The Skid effect simulates the sudden
platter stop of a turntable, like pressing the stop button on a turn-
table. When the Scratch Effect is activated the

SCRATCH/SKID

BUTTON (18)

will glow red, when the Skid Effect is selected the

button will glow yellow. Once the Scratch Effect has been acti-
vated the

JOG WHEEL (24)

may be used in the same fashion a

turntable platter is used. Use the

JOG WHEEL (24)

to simulate

the scratch motion on a turntable platter and to manipulate play-
back. Both the Skid and Scratch

TIME PARAMETERS (13)

can be

adjusted from 0010 to 9990. 9990 will give you the longest Skid
times. The SKID value ranges from a 10ms to ten seconds.

«
...
30
31
32
33
34
...
»

Содержание VELOCITY MP3












































Отзывы:

Нет отзывов

Похожие инструкции для VELOCITY MP3

Бренд: Impecca Страницы: 23

Бренд: MasterCraft Страницы: 14

Бренд: Roadstar Страницы: 32

Бренд: Radio Shack Страницы: 12

Accurian portable CD Player

Бренд: Radio Shack Страницы: 2

Бренд: Pyle Pro Страницы: 10

Бренд: Trotec Страницы: 21

Бренд: JBSYSTEMS Light Страницы: 44

Бренд: Aiwa Страницы: 16

Mix Stick DDA8040-CHR

Бренд: Disney Страницы: 28

Бренд: Onkyo Страницы: 16

Бренд: NAD Страницы: 18

Бренд: RCA Страницы: 40

Бренд: Technics Страницы: 36

Бренд: Technics Страницы: 24

Бренд: Technics Страницы: 28

Бренд: Technics Страницы: 20

Бренд: Technics Страницы: 53

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды